Features: • Small Form Factor transceiver
• Excellent EMI performance
• RJ-45 style LC™ connector system
• Half the size of SC Duplex 1x9 transceiver
• Single power supply (3.3 V)
• Extremely low power consumption of 445 mW typical
• PECL and LVPECL differential inputs and outputs
• System optimized for 62.5/50 µm graded index fiber
• Multisource 2x5 footprint
• Small size for high port density
• UL-94 V-0 certified
• ESD Class 1 per MIL-STD 883D Method 3015.7
• Compliant with FCC (Class B) and EN 55022
• For distances of up to 550 m
• Class 1 FDA and IEC laser safety compliant
• AC/AC coupling in accordance to SFF MSAApplicationThe drawing below gives you a comparison between the different pinnings 2x5, 2x6, 2x10. Dimension for diameter and distance of additional pins is similar to the existing dimensions of the other pins.
Specifications
|
Parameter |
Symbol |
Limit Values |
Unit |
|
min. |
max. |
| Package Power Dissipation |
|
|
0.5 |
W |
| Data Input Levels (PECL) |
|
|
VCC0.5 |
V |
| Differential Data Input Voltage |
|
|
2.5 |
| Operating Ambient Temperature |
|
0 |
70 |
|
| Storage Ambient Temperature |
|
40 |
85 |
Soldering Conditions, Temp/Time
(MIL-STD 883C, Method 2003) |
|
|
250/5.5 |
/S |
| VCC max. |
|
|
5.5 |
V |
| ECL-Output current SD |
|
|
30 |
mA |
| ECL-Output current data |
|
|
50 |
Exceeding any one of these values may destroy the device immediately.
DescriptionThe Infineon V23818-H308-L57 OC-12 transceiver part of Infineon Small Form Factor transceiver family is based on the Physical Medium Depend (PMD) sublayer and baseband medium.
The appropriate fiber optic cable is 62.5 µm or 50 µm multimode fiber with LC™ connector.
The Infineon V23818-H308-L57 OC-12 transceiver is a single unit comprised of a transmitter, a receiver, and an LC™ receptacle. This design frees the customer from many alignment and PC board layout concerns.
This transceiver supports the LC™ connectorization concept. It is compatible with RJ-45 style backpanels for high end Data Com and Telecom applications while providing the advantages of fiber optic technology.
The module is designed for low cost SAN, LAN, WAN, Fibre Channel and Gigabit Ethernet applications. It can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, hubs, and local and wide area switches.
This transceiver of the V23818-H308-L57 operates at OC-12 ATM from a single power supply (+3.3 V). The full differential data inputs and outputs are PECL and LVPECL compatible.
V23818-H308-L57 Data Sheet
