V23809-J307-C13

• Compliant with existing standards
• Compact integrated transceiver unit with
   Laser diode transmitter
   Photodiode receiver
   Duplex SC receptacle
• Class 1 FDA and IEC laser safety compliant
• FDA Accession No. 9520890-05
• Single power supply (5 V)*
• Signal detect indicator
• PECL differential inputs and outputs
• Process plug included
• Wave solderable and washable with process plug inserted


*3.3 V version in 9.8 mm package available in June 1998 (V23816-J307-C313). Check web site for data sheet.

Package Power Dissipation⁽¹⁾...................................... 1.5 W
Supply Voltage (V_CCV_EE)................................................ 6 V
Data Input Levels (PECL) .................................... V_CC0.7 V
Differential Data Input Voltage..................................... 2.5 V
Operating Case Temperature...........................0°C to 70°C
Storage Ambient Temperature............. ...... 40°C to 85°C
Soldering Conditions, Temp/Time
(MIL-STD 883C, Method 2003) ............................ 250°C/5.5s
Note
1. For V_CCV_EE(min., max.). 50% duty cycle. The supply current does notinclude the load drive current of the receiver output. Add max. 45 mA for the three outputs. Load is 50to V_CC2 V.

This data sheet describes the Siemens multimode 1.0625 GBd Fibre Channel transceiver, which complies with the Fibre Channel Physical and Signaling Interface (FC-PH), ANSI X3T11 Fibre Channel Physical Standard class 100-M5-SN-I.

The appropriate ANSI X3T11  fiber optic cable is 50m (from 2 m up to 500 m) multimode fiber with Duplex SC connector. The use of 62.5 m multimode fiber will decrease the transmission distance.

The Siemens multimode 1.0625 GBd Fibre Channel transceiver is a single unit comprised of a transmitter, a receiver, and an SC receptacle. This design frees the customer from many alignment and PC board layout concerns. The module is designed for low cost LAN and WAN applications. ANSI X3T11  can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, intelligent hubs, and switches.

This ANSI X3T11  transceiver operates at 1.0625 Gbits per second from a single power supply (+5 V). The full differential data inputs and outputs are PECL compatible.