V23809-J17-C10

• Compliant with existing standards
• Compact integrated transceiver unit with
   MQW laser diode transmitter
   InGaAs PIN photodiode receiver
   Duplex SC receptacle
• Class 1 FDA and IEC laser safety compliant
• FDA Accession No. 9520890-05
• Single power supply (5 V or 3.3 V)
• Signal detect indicator
• PECL differential inputs and outputs
• Process plug included
• Wave solderable and washable with process plug inserted
• Performance exceeds FC 100-SM-LL-I
• Link length typical up to 10 Km
• Typical loss budget of more than 20 dB

This data sheet describes the Siemens single mode Fibre Channel transceiver, which complies with the Fibre Channel Physical and SignalingInterface (FC-PH), ANSI X3T11 Fibre Channel Physical Standard Class 100-SM-LL-I, Revision 4.3.

The appropriate fiber optic cable is 9m (mode field diameter) single mode fiber with Duplex SC connector. The Siemens single mode Fibre Channel transceiver is a single unit comprised of a transmitter, a receiver, and an SC receptacle. This design frees the customer from many alignment and PC board layout concerns. The ANSI X3T11  module is designed for low cost LAN and WAN applications. It canbe used as the network end device interface in workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, intelligent hubs, and local and wide area switches.

This ANSI X3T11  transceiver operates at 1.0625 Gbits per second from a single power supply (+5 Volt or 3.3 Volt). The full differential data inputs and outputs are PECL compatible.