V15X10P

The typical pattern and trimming illustrations show that the V5X5P resistor has 16 trimming points, the V15X5P has 20 and the V15X10P has 21. These trimming points are arranged around the chip periphery and are clearly indicated. Trimming to the desired resistance value and tolerance is accomplished by cutting the trim points, thereby producing specific incremental changes in the chip's resistance value relative to the original prevalue; up to + 20 % for the V5X5P, + 30 % for the V15X5P, and + 50 % for the V15X10P (not all trim points need be used; the R necessary to adjust the pre-value to the desired final value dictates which trim points neet to be used).

Monitoring of circuit output while "actively" trimming readily permits adjustment of the chip to ± 0.005 %.

Vishay precision chip resistors V15X10P offer an order of magnitude of improvement over other chip resistors in hybrid applications. With a maximum Temperature Coefficient of Resistance (TCR) of ± 5 ppm/, selected TCR tracking to 0.5 ppm/and factory supplied resistance tolerances to ± 0.01 %, they provide the user with accuracy and stability not available in other chip resistor products. If desired they can be user trimmed to any value within ± 0.005 %.

Vishay precision chip resistors of V15X10P are designed to meet or exceed the requirements of MIL-PRF-55342 characteristic E. Thee V15X10P is available either factory trimmed to exact resistance values (option T) or ready for user trimmingoption U).