V131DHB34

Surge Energy Rating :
Peak Surge Current : 40 KA
Operating Temperature Range : - 55 C to + 85 C
Packaging : Bulk
Product : MOV
Mounting : Radial
Voltage Rating AC : 130 V
Voltage Rating DC : 175 V
Clamping Voltage : 345 V
Capacitance : 10000 pF
Diameter : 32 mm


Features:

• Wide Operating Voltage Range
    V_M(AC)RMS. . . . . . . . . . . . . . . . . . . . . . . .   110V to 750V
• High Energy Absorption
    Capability. . . . . . . . . . . . . . . . . . . .W_TM = 220J to 1050J
• High Peak Pulse Current
    Capability . . . . . . . . . . . . . . . . . . . . . . . . .I_TM = 40,000A*
• Rigid Terminals for Secure Through-Hole Solder Mounting
• No Derating Up to 85oC Ambient


Specifications

Continuous:
Steady State Applied Voltage:
AC Voltage Range (V_M(AC)RMS) . . . . . . . . . . . . . . . . 110 to 750 V
DC Voltage Range (V_M(DC)) . . . . .. . . . . . . . . . . . . . .148 to 970 V
Transient:
Peak Pulse Current (I_TM)
For 8/20s Current Wave (See Figure 2) . .  . . . . . . . . . 40,000 A
Single Pulse Energy Range
For 2ms Current Square Wave (W_TM) . . . . . .  . . . .220 to 1050 J
Operating Ambient Temperature Range (T_A) . .. . . . . -55 to 85
Storage Temperature Range (T_STG). . . . . . . . . . . . . -55 to 125
Temperature Coefficient (V) of Clamping Voltage (VC) at Specified Test Current . .  <0.01 %/

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Description

The DHB34 Series of transient surge suppressors are industrial highenergy Metal-Oxide Varistors (MOVs). They are designed to provide surge suppression in the AC mains outdoor and service entrance environment (distribution panels) of buildings. DHB34 applications also include industrial heavy motors, controls, and power supplies such as used in the oil-drilling, mining, and transportation fields, including HVAC and motor/generator applications.

The DHB34 Series provides rigid terminals for through-hole solder mounting on printed circuit boards, thereby eliminating the need for screw mounting.See Ratings and Specifications table for part numbers.

Parameters:

Technical/Catalog Information	V131DHB34
Vendor	Littelfuse Inc
Category	Circuit Protection
Maximum AC Volts	130Vrms
Maximum DC Volts	175VDC
Current-Surge	40kA
Package / Case	34mm Square
Varistor Voltage	248V
Energy	291J
Number of Circuits	1 - Single
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	V131DHB34 V131DHB34