Varistors 100V 2000pF
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Product : | MOV | Voltage Rating DC : | 81 V | ||
Voltage Rating AC : | 60 V | Clamping Voltage : | 175 V | ||
Diameter : | 19.7 mm | Peak Surge Current : | 4.5 KA | ||
Capacitance : | 2000 pF | Operating Temperature Range : | - 55 C to + 125 C | ||
Mounting : | Radial | Packaging : | Bulk |
Continuous: RA8 SERIES RA16 SERIES RA22 SERIES UNITS
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS) . . . . . . . . . . . . 4 to 275 10to 275 4 to 275 V
DC Voltage Range (VM(DC) . . . . . . . . . . . . . . . . 5.5 to 369 14 to 369 18 to 369 V
Transient:
Peak Pulse Current (ITM)
For 8/20µs Current Wave (See Figure 2). . . . . . 100 to1200 1000 to 4500 2000 to 6500 A
Single Pulse Energy Range (Note 1)
For 10/1000µs Current Wave (WTM ) . . . . . . . . 0.4 to 23 3.5 to 75 70to 160 J
Operating Ambient Temperature Range (TA) . . -55 to 125 -55 to -125 -55 to -125
Storage Temperature Range (TSTG) . . . . . . . . . . -55 to 150 -55 to 150 -55 to 150
Temperature Coefficient (V) of Clamping Voltage
(VC) at Specified Test Current . . . . . . . . . . . . . . . . . <0.01 <0.01 <0.01 %/
Hi-Pot Encapsulation (Isolation Voltage Capability)
(Dielectric must withstand indicated DC voltage for
one minute per MIL-STD 202, Method 301) . . . . . . . . . 5000 5000 5000 V
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . . . . . 1000 1000 1000 MΩ
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the
device. This is a stress only rating and operation of the device at these or any other conditions above
those indicated in the operational sections of this specification is not implied.
The V100RA16 transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for secure circuit-board mounting. This feature makes these devices suitable for industrial applications critical to vibration. Their construction permits operation up to 125oC (ambient) without derating.
The V100RA16 is available in voltage ratings up to 275V VM(AC)RMS, and energy levels up to 140J. These varistors are used in automotive, motor-control, telecommunication, and military applications.
See RA Series Device Ratings and Specifications table for part number and brand information.
Technical/Catalog Information | V100RA16 |
Vendor | Littelfuse Inc |
Category | Circuit Protection |
Maximum AC Volts | 60VAC |
Maximum DC Volts | 81VDC |
Current-Surge | 4.5kA |
Package / Case | Radial |
Varistor Voltage | 100V |
Energy | 20J |
Number of Circuits | 1 - Single |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | V100RA16 V100RA16 |