USB2504A

Features: ` Integrated USB2.0 Compatible 4-Port Hub- 4 Transaction Translators for highest performance- High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and Low-Speed (1.5Mbits/s) compatible- Full power management with per port or ganged, selectable power control- Detects Bus-Power/Self-Power sourc...

product image

USB2504A Picture
SeekIC No. : 004538783 Detail

USB2504A: Features: ` Integrated USB2.0 Compatible 4-Port Hub- 4 Transaction Translators for highest performance- High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and Low-Speed (1.5Mbits/s) compatible- Full po...

floor Price/Ceiling Price

Part Number:
USB2504A
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/22

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Integrated USB2.0 Compatible 4-Port Hub
- 4 Transaction Translators for highest performance
- High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and Low-Speed (1.5Mbits/s) compatible
- Full power management with per port or ganged, selectable power control
- Detects Bus-Power/Self-Power source and changes mode automatically
` Complete USB Specification 2.0 Compatibility
- Includes USB2.0 Transceivers
` VID/PID/DID, and Port Configuration for Hub via:
- Single Serial I2C EEPROM
- SMBus Slave Port
` Default VID/PID/DID, allows functionality when configuration EEPROM is absent
` Hardware Strapping options allow for configuration without an external EEPROM or SMBus Host
` On-Board 24MHz Crystal Driver Circuit or 24 MHz external clock driver
` Internal PLL for 480MHz USB2.0 Sampling
` Internal 1.8V Linear Voltage Regulator
` Integrated USB termination and Pull-up/Pull-down resistors
` Internal Short Circuit protection of USB differential signal pins
` 1.8 Volt Low Power Core Operation
` 3.3 Volt I/O with 5V Input Tolerance
` 64-Pin TQFP or 56 Pin QFN Package; green, leadfree package also available



Description

The USB2504A is fully compliant with the USB2.0 Specification and will attach to a USB host as a Full-Speed Hub or as a Full-/High-Speed Hub. The 4-Port Hub supports Low-Speed, Full-Speed, and High-Speed (if operating as a High-Speed Hub) downstream devices on all of the enabled downstream ports.

The USB2504A  is available for each downstream facing port. This architecture ensures maximum USB throughput for each connected device when operating with mixed-speed peripherals.

The Hub of USB2504A works with an external USB power distribution switch device to control VBUS switching to downstream ports, and to limit current and sense over-current conditions. All required resistors on the USB ports are integrated into the Hub. This includes all series termination resistors on D+ and D pins and all required pull-down and pull-up resistors on D+ and D pins. The over-current sense inputs for the downstream facing ports have internal pull-up resistors.

Throughout this document the upstream facing port of the hub will be referred to as the upstream port, and the downstream facing ports will be called the downstream ports.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Soldering, Desoldering, Rework Products
Cables, Wires - Management
Memory Cards, Modules
Audio Products
Motors, Solenoids, Driver Boards/Modules
Sensors, Transducers
View more