UPF01002

Features: Complete 10 Gbit/s Ethernet and Fibre Channel PHY supporting WAN and LAN applications Complies with IEEE 802.3ae Compliant to XENPAK multisource agreement Complies with ANSI 1413-D Embedded Controller allows for control and tuning of the PMDs via analog interfaces Clock & data recov...

product image

UPF01002 Picture
SeekIC No. : 004538339 Detail

UPF01002: Features: Complete 10 Gbit/s Ethernet and Fibre Channel PHY supporting WAN and LAN applications Complies with IEEE 802.3ae Compliant to XENPAK multisource agreement Complies with ANSI 1413-D Embedd...

floor Price/Ceiling Price

Part Number:
UPF01002
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/22

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

Complete 10 Gbit/s Ethernet and
    Fibre Channel PHY supporting
    WAN and LAN applications
Complies with IEEE 802.3ae
Compliant to XENPAK multisource
    agreement
Complies with ANSI 1413-D
Embedded Controller allows for
    control and tuning of the PMDs
    via analog interfaces
Clock & data recovery and clock
    multiplying unit without external
    loop filter components
Complies with jitter tolerance
    and jitter transmit requirements
    according to Telcordia GR-1244-
    CORE and ITU-T G.825
Supports various clocking
     modes based on external reference
     clocks, loop- and external
     timing
Integrated bit error rate tester
    (BERT) usable for multiple atspeed
    diagnostic scenarios
Includes the XGXS, PCS, WIS,
    and PMA sublayers of the OSI
    protocol stack
Synchronization and de-skewing
    of XAUI lanes
Integrated standard STS-192/
    STM-64 SONET/SDH framer
    according to GR-253-CORE,
    ANSI T1. 105/416, ITU-T G.707.
Optionally maps/extracts
   10 Gbit/s Ethernet packets into/
    from the STS-192c/VC4-64c
    payload or conveys them to the
    serial interface directly
Performance monitoring according
    to ANSI T1. 231
Various loop back modes for
    system debugging
Provides access to E²PROM via
    I²C interface according to XENPAK
    requirements; automatic
   E²PROM download on power-up
Power-efficient design:
   <1.3W @ 1.3V



Application

Fiber optic modules according to
    the XENPAK multi-source
    agreement
10 Gbit/s Ethernet and Fibre
    Channel line cards
Ethernet backbones in Metro
    Area Networks
Terabit Routers



Description

The UPF01002 TenGiPHY-W is a single chip transceiver IC for 10 Gbit/s Ethernet and Fibre Channel connectivity.

UPF01002 offers a serial, full duplex 10 Gbit/s interface to an optical sub-module. The integrated CDR and CMU operate at data rates between 9.95328 and 10.51875Gbit/s. The TenGiPHY-W provides the XGXS, PCS and PMA sublayers of then 10G Ethernet and Fibre Channel standards. For WAN applications a standard OC-192/STM-64 SONET/SDH framer together with flexible clocking modes enables a direct connection to the public network without additional components.

The networking system UPF01002 can control the chip via a narrow-width MDIO interface by writing and reading its control and status registers.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
RF and RFID
Static Control, ESD, Clean Room Products
Tapes, Adhesives
803
Undefined Category
Programmers, Development Systems
View more