Features: ` Capable of high-speed operation and variable instruction execution time to power save -0.95 s, 1.91 s, 15.3 s (Main system clock: operating at 4.19 MHz) -122 s (Subsystem clock: operating at 32.768 kHz)` 75X architecture comparable to that for an 8-bit microcomputer is employed` Built-...
UPD75004: Features: ` Capable of high-speed operation and variable instruction execution time to power save -0.95 s, 1.91 s, 15.3 s (Main system clock: operating at 4.19 MHz) -122 s (Subsystem clock: operatin...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe UPD70008AG-4 is a power saving,high performance,general purpose 8-bit microprocesso...
DescriptionThe UPD70236AGD-10-5BB is designed as one kind of MPSC (multi-protocol serial controlle...
Features: •Small 32-bit RISC CPU core•30 ns minimum instruction execution time(33 MHz ...
Parameter |
Symbol |
Rating |
Unit | ||
Supply Voltage |
VDD |
−0.3 to +7.0 |
V | ||
Input Voltage |
V11 |
Other than ports 4, 5 |
-0.3 to VDD+0.3 |
V | |
V12 |
Ports 4, 5 | w/pull-up resistor |
-0.3 to VDD+0.3 |
V | |
Open drain |
−0.3 to +11 |
V | |||
Output voltage |
VO |
-0.3 to VDD+0.3 |
V | ||
High-Level Output Current |
IOH
|
1 pin |
-10 |
mA | |
All pins |
-30 |
mA | |||
Low-Level Output Current |
IOL*
|
Ports 0, 3, 4, 5 1 pin |
Peak |
30 |
mA |
rms |
15 |
mA | |||
Other than ports 0, 3, 4, 5 1 pin |
Peak |
20 |
mA | ||
rms |
10 |
mA | |||
Total of ports 0, 3, 4, 5, 8 | Peak |
160 |
mA | ||
rms |
120 |
mA | |||
Total of ports 2, 6, 7 | Peak |
66 |
mA | ||
rms |
33 |
mA | |||
Operating Temperature |
Topt |
-40 to +85 |
°C | ||
Storage Temperature |
Tstg |
-65 to +150 |
°C |
The UPD75004 is one of the 75X Series 4-bit single-chip microcomputer.
In addition to high-speed operation with 0.95 s minimum instruction execution time for the CPU, the PD75008 employs a serial bus interface with standard NEC format, the UPD75004 is a powerful product with a high cost/performance ratio.
The UPD75004 with PROM, which is provided with PD75008, is applicable for evaluating systems under development, or for small-scale production of developed systems.