UMSH-7511MD-5T

The UMSH-7511MD-5T  has some absolute maximum ratings.When item is power supply voltage (1),the symbol is VCC,the min is -0.3,the max is 4.6,the unit is V.When item is power supply voltage (2),the symbol is DDVDH,the min is -0.3,the max is 6.0,the unit is V.When item is input voltage,the symbol is VIN,the min is -0.3,the max is VCC+0.3,the unit is V.When item is operating temperature range,the symbol is Top,the min is -20,the max is +70,the unit is .When item is storage temperature range,the symbol is Tstr,the min is -30,the max is +80,the unit is .

The UMSH-7511MD-5T has some informations.The first one is the LCD module contains a C-MOS LSI. To avoid damage tom the LSI from static electricity generated while working,Ground your body, work/assembly areas and assembly equipment to protect the module against STATIC ELECTRICITY.The second one is do not input any signal before power is turned on.The third one is do not take LCM from it's packaging bag unit it is assembled.The fourth one is peel off take LCM protective film slowly since static electricity may be generated.The fifth one is pay attention to the humidity of the work shop, 50~60%RH is satisfactory.The sixth one is Use a non-leak iron for soldering LCM.The seventh one is do not touch the display surface or connection terminals area with bare hands.Smudges on the display surface reduce the insulation between terminals.

To avoid degradation of the device UMSH-7511MD-5T, do not store the module under the conditions of direct sunlight , high temperature or high humidity . Keep the module in bags designed to prevent static electricity charging under low temperature / normal humidity conditions(avoid high temperature / high humidity and low temperature below 0􀐺)