Features: · 1.5 A Continuous Output Current· 45 V Output Sustaining Voltage· Internal Clamp Diodes· Digital Control of Output Current· Internal Thermal Shutdown Circuitry· Similar to Dual PBL3770SpecificationsMotor Supply Voltage, VBB .................... 45 V Output Current, IOUT (tw 20 s) .. ±1...
UDN2917EB: Features: · 1.5 A Continuous Output Current· 45 V Output Sustaining Voltage· Internal Clamp Diodes· Digital Control of Output Current· Internal Thermal Shutdown Circuitry· Similar to Dual PBL3770Spe...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Motor Supply Voltage, VBB .................... 45 V
Output Current, IOUT (tw 20 s) .. ±1.75 A
(Continuous) ............................... ±1.5 A
Logic Supply Voltage, VCC .................... 7.0 V
Logic Input Voltage Range,
VIN ................................ -0.3 V to +7.0 V
Output Emitter Voltage, VE ................... 1.0 V
Package Power Dissipation,
PD ......................................... See Graph
Operating Temperature Range,
TA .................................. -20°C to +85°C
Storage Temperature Range,
TS ................................ -55°C to +150°C
Output current rating may be limited by duty cycle,ambient temperature, and heat sinking. Under any set of conditions, do not exceed the specified peak current rating or a junction temperature of +150°C.
The UDN2917EB motor driver is designed to drive both windings of a bipolar stepper motor or bidirectionally control two dc motors. Both bridges are capable of sustaining 45 V and include internal pulse-width modulation (PWM) control of the output current to 1.5 A.
For PWM current control, the maximum output current UDN2917EB is determined by the user's selection of a reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0, 33%, 67%, or 100% of the maximum level. A PHASE input to each bridge determines load current direction. Active-low ENABLE inputs control the four drivers in each bridge.
The UDN2917EB bridges include both ground clamp and flyback diodes for protection against inductive transients. Internally generated delays prevent cross-over currents when switching current direction. Special power-up sequencing is not required. Thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
The UDN2917EB is supplied in a 44-lead power PLCC for surfacemount applications. Its batwing construction provides for maximum package power dissipation in the smallest possible construction. The UDN2917EB is provided for operation over an ambient temperature range of -20°C to +85°C.