Features: SpecificationsDescription The UC2842A/3A/4A/5A has the following features including Optimized for Off-line and DC to DC Converters;Low Start Up Current (<0.5mA);Trimmed Oscillator Discharge Current;Automatic Feed Forward Compensation;Pulse-by-Pulse Current Limiting;Enhanced Load Respo...
UC2842A/3A/4A/5A: Features: SpecificationsDescription The UC2842A/3A/4A/5A has the following features including Optimized for Off-line and DC to DC Converters;Low Start Up Current (<0.5mA);Trimmed Oscillator Disch...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The UC2842A/3A/4A/5A has the following features including Optimized for Off-line and DC to DC Converters;Low Start Up Current (<0.5mA);Trimmed Oscillator Discharge Current;Automatic Feed Forward Compensation;Pulse-by-Pulse Current Limiting;Enhanced Load Response Characteristics;Under-Voltage Lockout With Hysteresis;Double Pulse Suppression;High Current Totem Pole Output;Internally Trimmed Bandgap Reference;500kHz Operation;Low RO Error Amp.
The difference between members of this UC2842A/3A/4A/5A family are shown in the table below.Providing the necessary features to control current mode switched mode power supplies, this family has the following improved features. Start up current is guaranteed to be less than 0.5mA. Oscillator discharge is trimmed to 8.3mA. During under voltage lockout, the output stage can sink at least 10mA at less than 1.2V for VCC over 5V.TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
At present there is not too much information about this model.If you are willing to find more about UC2842A/3A/4A/5A, please pay attention to our web! We will promptly update the relevant information.