UC1525A/27A

      The UC1525A/27A,UC2525A/27A and UC3525A/27A has 10 features.The first one is 8 to 35V Operation.The second one is 5.1V Reference Trimmed to ±1%.The third one is 100Hz to 500kHz Oscillator Range.The fourth one is separate Oscillator Sync Terminal.The fifth one is adjustable Deadtime Control.The sixth one is internal Soft-Start.The seventh one is Pulse-by-Pulse Shutdown.The eighth one is input Undervoltage Lockout with Hysteresis.The ninth one is latching PWM to Prevent Multiple Pulses.The tenth one is dual Source/Sink Output Drivers.
      The UC1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip +5.1V reference is trimmed to ±1% and the input common-mode range of the error amplifier includes the reference voltage, eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between the CT and the discharge terminals provides a wide range of dead-time adjustment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands.These functions are also controlled by an undervoltage lockout which keeps the outputs off and the soft-start capacitor discharged for sub-normal input voltages.This lockout circuitry includes approximately 500mV of hysteresis for jitter-free operation. Another feature of these PWM circuits is a latch following the comparator. Once a PWM pulse has been terminated for any reason, the outputs will remain off for the duration of the period. The latch is reset with each clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200mA. The UC1525A output stage features NOR logic,giving a LOW output for an OFF state. The UC1527A utilizes OR logic which results in a HIGH output level when OFF.
      Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment.