Features: · Integrated half-bridge power transistors· Integrated bootstrap diode· Integrated low-voltage supply· Maximum voltage of 550 V· Adjustable oscillator frequency· Soft start· Minimum glow time controlApplication· Driver for any kind of load in a half-bridge configuration· Especially for e...
UBA2024: Features: · Integrated half-bridge power transistors· Integrated bootstrap diode· Integrated low-voltage supply· Maximum voltage of 550 V· Adjustable oscillator frequency· Soft start· Minimum glow t...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· Driver for any kind of load in a half-bridge configuration
· Especially for electronically self-ballasted Compact Fluorescent Lamps (CFL) for lamp currents up to 220 mA (RMS) under the restriction that the maximum junction temperature is not exceeded.
SYMBOL |
PARAMETER |
CONDITIONS |
MIN. |
MAX. |
UNIT |
VHV | high-voltage supply voltage | normal operation |
- |
373 |
V |
mains transients during 0.5 s |
- |
550 |
V | ||
VFS | floating supply voltage |
VHV |
VHV+14 |
V | |
VDD | low-voltage output supply voltage | DC supply |
0 |
14 |
V |
IDD | low-voltage output supply current | peak value is internally limited; Tamb = 25 °C |
0 |
5 |
mA |
VPGND | power ground voltage | referenced to SGND |
-1 |
+1 |
V |
Vi(RC) | internal oscillator input voltage on pin RC | Ii(RC) < 1 mA |
0 |
VDD |
V |
Vi(SW) | sweep time input voltage on pin SW | Ii(SW) < 1 mA |
0 |
VDD |
V |
SR | slew rate output on pin OUT | repetitive |
-4 |
+4 |
V/ns |
Tj | junction temperature |
-40 |
+150 |
||
Tamb | ambient temperature |
-40 |
+150 |
||
Tstg | storage temperature |
-55 |
+150 |
||
Vesd(HBM) | HBM electrostatic discharge voltage on pinsHV and VDD SW, RC, FS and OUT |
note 1 |
- - |
1000 2500 |
V V |
Vesd(MM) | MM electrostatic discharge voltage on pins FS HV, VDD, SW, RC and OUT |
note 2 |
- - |
200 250 |
V V |
Notes
1. In accordance with the Human Body Model (HBM): equivalent to discharging a 100 pF capacitor through a 1.5 k
series resistor.
2. In accordance with the Machine Model (MM): equivalent to discharging a 200 pF capacitor through a 1.5 k series
resistor and a 0.75 H inductor.
The UBA2024 is a high-voltage monolithic integrated circuit made in the EZ-HV SOI process. The IC is designed for driving CFL lamps in a half-bridge configuration.
The IC UBA2024 features a soft start function, an adjustable internal oscillator and an internal drive function with a high-voltage level shifter for driving the half-bridge.
To guarantee an accurate 50% duty cycle, the oscillator signal is passed through a divider before being fed to the output drivers.