Features: ` 200-MHz Bandwidth` 250-k Input Resistance` Selectable Nominal Amplification of 10,100, or 400` No Frequency Compensation RequiredApplication·Audio·Automotive·Broadband·Digital Control·Military·Optical Networking·Security·Telephony·Video & Imaging·WirelessPinoutSpecifications ...
UA733C: Features: ` 200-MHz Bandwidth` 250-k Input Resistance` Selectable Nominal Amplification of 10,100, or 400` No Frequency Compensation RequiredApplication·Audio·Automotive·Broadband·Digital Control·Mi...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
uA733C |
uA7433M |
UNIT | ||
Supply voltage, VCC+ (see Note 1) |
8 |
8 |
V | |
Supply voltage, VCC (see Note 1) |
-8 |
-8 |
V | |
Differential input voltage |
±5 |
±5 |
V | |
Common-mode input voltage |
±6 |
±6 |
V | |
Output current |
10 |
10 |
mA | |
Continuous total dissipation |
See Dissipation Rating Table | |||
Package thermal impedance, JA (see Notes 2 and 3) | D package |
86 |
/W | |
N package | 80 | |||
NS package | 76 | |||
Maximum junction temperature, TJ | 150 | |||
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds | JG or U package |
300 |
||
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds | D or P package |
-65to150 |
-65to150 |
† Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at these or any other conditions beyond those indicated in the recommended operating conditions section of this specification is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential input voltages, are with respect to the midpoint between VCC+ and VCC.
2. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) TA)/JA. Operating at the absolute maximum TJ of 150°C can affect reliability.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
The A733 is a monolithic two-stage video amplifier with differential inputs and differential outputs. Internal series-shunt feedback provides wide bandwidth, low phase distortion, and excellent gain stability.Emitter-follower outputs enable the A733 to drive capacitive loads, and all stages are current-source biased to obtain high common-mode and supply-voltage rejection ratios.
Fixed differential amplification of 10 V/V, 100 V/V, or 400 V/V A733 may be selected without external components,or amplification may be adjusted from 10 V/V to 400 V/V by the use of a single external resistor connected between 1A and 1B. No external frequency-compensating components are required for any gain option.
The A733 is particularly useful in magnetic-tape or disc-file systems using phase or NRZ encoding and in high-speed thin-film or plated-wire memories. Other applications of A733 include general-purpose video and pulse amplifiers where wide bandwidth, low phase shift, and excellent gain stability are required.
The A733C is characterized for operation from 0°C to 70°C; the A733M is characterized for operation over the full military temperature range of −55°C to 125°C.