Features: ` 6-to-12 Demultiplexer/Multiplexer Allows SDIO Port Expansion` Built-in Level Translator Eliminates Voltage Mismatch Between Baseband and SD Card or SDIO Peripheral` VCCA, VCCB0, and VCCB1 Each Operate Over Full 1.1-V to 3.6-V Range` Latch-Up Performance Exceeds 100 mA Per JESD 78, Clas...
TXS02612: Features: ` 6-to-12 Demultiplexer/Multiplexer Allows SDIO Port Expansion` Built-in Level Translator Eliminates Voltage Mismatch Between Baseband and SD Card or SDIO Peripheral` VCCA, VCCB0, and VCCB...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.29 - .49 / Piece
Translation - Voltage Levels 1B Bidirec Vltg- Lev Translator
US $.15 - .18 / Piece
Translation - Voltage Levels 1B Bidirec Vltg- Lev Translator
MIN | MAX | UNIT | ||
VCCA VCCB0 Supply voltage range(2) VCCB1 |
-0.5 | 4.6 | V | |
VI Input voltage range | A port, B0 port, B1 port, control inputs | -0.5 | VCCx + 0.5 | V |
VO Voltage range applied to any output in the high-impedance or power-off state | A port, B0 port, B1 port | -0.5 | VCCx + 0.5 | V |
IIK Input clamp current | VI < 0 | -50 | mA | |
IOK Output clamp current | VO < 0 | -50 | mA | |
ICC/IGND Continuous current through VCCA, VCCB0, VCCB1, or GND | ±100 | mA | ||
Tstg Storage temperature range | -65 | 150 |
The TXS02612 is designed to interface the cellphone baseband with external SDIO peripherals. The device includes a 6-channel SPDT switch with voltage-level translation capability. This allows a single SDIO port to be interfaced with two SDIO peripherals. The TXS02612 has three separate supply rails that operate over the full range of 1.1 V to 3.6 V. This allows the baseband and SDIO peripherals to operate at different supply voltages if required.The select (SEL) input is used to choose between the B0 port and B1 port. When SEL = Low, B0 port is selected; when SEL = High, B1 port is selected. SEL is referenced to VCCA. For the unselected B port, the clock output is held low, whereas the data and command I/Os are pulled high to their respective VCCB through a 70-k resistor (±30% tolerance).