TX2-12V

Contact Form : 2 Form C (DPDT-BM)
Contact Current Rating : 2 A
Maximum Switching Current : 2 A
Termination Style : Solder Terminal
Isolation : 20 dB at 1 GHz
Insertion Loss : 0.8 dB at 1 GHz
Coil Type : Single Side Stable
Coil Voltage : 12 VDC
Power Consumption : 140 mW
Coil Current : 11.7 mA


Description

The TX2-12V has four features.(1)breakdown voltage between contacts and coil: 2,000 V.(2)surge withstand between contacts and coil: 2,500 V.(3)high contact capacity: 2 A 30 V DC.(4)surface-mount type available.

The TX2-12V has some remarks.(1)specifications will vary with foreign standards certification ratings.(2)measurement at same location as "Initial breakdown voltage" section.(3)by resistive method, nominal voltage applied to the coil; contact carrying current:2 A.(4)nominal voltage applied to the coil, excluding contact bounce time.(5)nominal voltage applied to the coil, excluding contact bounce time without diode.(6)Half-wave pulse of sine wave: 6 s;detection time:10s.(7)half-wave pulse of sine wave: 6 ms.(8)detection time: 10s. (9)refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.

The TX2-12V has some notes.packing style:(1)the relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below.(2)tape and reel packing (surface-mount terminal type) Tape dimensions Dimensions of plastic reel.