TSOP7000

High Level Pulse Width :
Low Level Pulse Width :
Package / Case :
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 25 C
Viewing Angle : 45 deg
Packaging : Tube
Operating Voltage : 2.7 V to 5.5 V
Power Dissipation : 30 mW
Transmission Distance : 20 m
Carrier Frequency : 455 KHz
Minimum High Level Output Voltage : 2.45 V
Output Current : 15 mA
Supply Current : 2 mA


Features:

· Photo detector and preamplifier in one package
· Internal Bandfilter for PCM frequency
· Internal shielding against electrical field disturbance
· TTL and CMOS compatibility
· Output active low




Specifications

Parameter	Test Conditions	Symbol	Value	Unit
Supply Voltage	Pin 3	VS	0.3...6.0	V
Voltage at output to supply	Pin 1	VS VO	0.3...VS+0.3	V
Supply Current	Pin 3	IS	5	mA
Output Voltage	Pin 1	VO	0.3...6.0	V
Output Current	Pin 1	IO	15	mA
Junction Temperature		C	100
Storage Temperature Range		Tstg	25...+85
Operating Temperature Range		Tamb	25...+85
Soldering Temperature	t 10 s, 1 mm from case	Tsd	260
Power Consumption		Ptot	30	mW

Description

The TSOP7000 is designed as a miniaturized receiver for infrared remote control and IR data transmission. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. The main benefit is the operation with high data rates and long distances.

TSOP7000 has eleven features. (1) Photo detector and preamplifier in one package. (2) Internal bandfilter for PCM frequency. (3) Internal shielding against electrical field disturbance. (4) TTL and CMOS compatibility. (5) Output active low. (6) Data rate 20kbit/s. (7) Small size package. (8) Supply voltage 2.7 to 5.5V. (9) Short setting time after power on. (10) High envelope duty cycle can be received. (11) Enhanced immunity against disturbance from energy saving lamps. That are all the main features.

Some absolute maximum ratings of TSOP7000 have been concluded into several points as follow. (1) Its supply voltage would be from -0.3V to 6.0V. (2) Its voltage at output to supply would be -0.3V to Vs+0.3V. (3) Its supply current would be 5mA. (4) Its output voltage would be from -0.3V to 6.0V. (5) Its output current would be 15mA. (6) Its junction temperature would be 100°C. (7) Its storage temperature range would be from -25°C to +85°C. (8) Its operating temperature range would be from -25°C to +85°C. (9) Its soldering temperature would be 260°C. (10) Its power consumption would be 30mW.

Also some basic characteristics about TSOP7000. (1) Its supply current pin 3 would be typ 2.0mA and max 2.7mA. (2) Its supply voltage pin 3 would be min 2.7V and typ 5V and max 5.5V. (3) Its threshold irradiance would be typ 0.8mW/m2 and max 1.5mW/m2. (4) Its maximum irradiance would be min 30W/m2. (5) Its output voltage low pin 1 would be max 100mV. (6) Its output voltage high pin 1 would be min Vs-0.25V. (7) Its bandpassfilter quality would be typ 10. (8) Its out-pulse width tolerance would be min -15us and typ +5us and max +15us. (9) Its delay time of output pulse would be min 15us and max 36us. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!