TSOP4833

High Level Pulse Width :
Low Level Pulse Width :
Minimum High Level Output Voltage :
Package / Case :
Output Current : 5 mA
Power Dissipation : 10 mW
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 25 C
Transmission Distance : 45 m
Carrier Frequency : 33 KHz
Viewing Angle : 45 deg
Packaging : Tube
Operating Voltage : 2.7 V to 5.5 V
Supply Current : 0.85 mA


Description

The TSOP4833 series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The features of it are as follows:(1)photo detector and preamplifier in one package; (2)internal filter for PCM frequency; (3)TTL and CMOS compatibility; (4)output active low; (5)improved shielding against electrical field disturbance; (6)low power consumption; (7)high immunity against ambient light; (8)continuous data transmission possible(800 bit/s); (9)suitable burst length10 cycles/burst.

What comes next is about the TSOP4833 maximum ratings: (1)supply voltage: -0.3V to 6.0V; (2)supply current: 5mA; (3)output voltage: -0.3V to 6.0V; (4)output current: 5mA; (5)junction temperature: 100; (6)storage temperature range: -25 to +85; (7)operating temperature range: -25 to +85; (8)power consumption: 50 mW; (9)soldering temperature: 260.

The following is about the TSOP4833 electrical characteristics:(1)supply current (Pin 3): 1.1mA typical,0.8mA min and 1.5 mA max at VS = 5V, Ev = 0 and 1.4mA typical at VS = 5V, Ev = 40 klx, sunlight; (2)supply voltage: 4.5V min and 5.5V max; (3)transmission distance: 35m typical at Ev = 0, test signal see fig.7, IR diode TSIP5201, IF = 250mA; (4)output voltage low (Pin 3): 250mV max at IOSL = 0.5 mA,Ee = 0.7 mW/m2,f = fo; (5)irradiance (30 - 40 kHz):0.2 mW/m2 typical and 0.4 mW/m2 max at pulse width tolerance: tpi 5/fo < tpo < tpi + 6/fo, test signal(see fig.7); (6)irradiance (56 kHz):0.3 mW/m2 typical and 0.6 mW/m2 max at Pulse width tolerance: tpi 5/fo < tpo < tpi + 6/fo, test signal see fig.7; (7)irradiance: 30 W/m2 min at tpi 5/fo < tpo < tpi + 6/fo; (8)directivity: ±45 deg typical at angle of half transmission distance.