TSOP2136UF1

The TSOP2136UF1 is are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The features of it are as follows:(1)photo detector and preamplifier in one package; (2)internal filter for PCM frequency; (3)TTL and CMOS compatibility; (4)output active low; (5)improved shielding against electrical field disturbance; (6)low power consumption; (7)high immunity against ambient light; (8)enhanced data rate of 2400 bit/s; (9)operation with short bursts possible(6 cycles/burst).

What comes next is about the TSOP2136UF1 maximum ratings: (1)supply voltage: -0.3V to 6.0V; (2)supply current: 5mA; (3)output voltage: -0.3V to 6.0V; (4)output current: 5mA; (5)junction temperature: 100; (6)storage temperature range: -25 to +85; (7)operating temperature range: -25 to +85; (8)power consumption: 50 mW; (9)soldering temperature: 260.

The following is about the TSOP2136UF1 electrical characteristics:(1)supply current (Pin 2): 1.1mA typical,0.8mA min and 1.5 mA max at VS = 5V, Ev = 0 and 1.4mA typical at VS = 5V, Ev = 40 klx, sunlight; (2)supply voltage: 4.5V min and 5.5V max; (3)transmission distance: 35m typical at Ev = 0, test signal see fig.8, IR diode TSAL6200, IF = 250mA; (4)output voltage low (Pin 1): 250mV max at IOSL = 0.5 mA,Ee = 0.7 mW/m2,f = fo; (5)irradiance (30 - 40 kHz):0.2 mW/m2 typical and 0.4 mW/m2 max at pulse width tolerance: tpi 5/fo < tpo < tpi + 5/fo, test signal(see fig.8); (6)irradiance (56 kHz):0.3 mW/m2 typical and 0.5 mW/m2 max at Pulse width tolerance: tpi 5/fo < tpo < tpi + 5/fo, test signal see fig.8; (7)irradiance: 30 W/m2 min; (8)directivity: ±45 deg typical at angle of half transmission distance.