DescriptionThe TSOP12381CA1 is miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The features of it are as follows:(1)photo detector and preamplifier in one package; (2)internal filter for...
TSOP12381CA1: DescriptionThe TSOP12381CA1 is miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The fea...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: · Photo detector and preamplifier in one package· Internal filter for PCM frequency· Imp...
Features: Photo detector and preamplifier in one packageInternal filter for PCM frequencyImproved ...
The TSOP12381CA1 is miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The features of it are as follows:(1)photo detector and preamplifier in one package; (2)internal filter for PCM frequency; (3)TTL and CMOS compatibility; (4)output active low; (5)improved shielding against electrical field disturbance; (6)low power consumption; (7)suitable burst length10 cycles/burst.
What comes next is about the TSOP12381CA1 maximum ratings: (1)supply voltage: -0.3V to 6.0V; (2)supply current: 5mA; (3)output voltage: -0.3V to 6.0V; (4)output current: 5mA; (5)junction temperature: 100; (6)storage temperature range: -25 to +85; (7)operating temperature range: -25 to +85; (8)power consumption: 50 mW; (9)soldering temperature: 260.
The following is about the TSOP12381CA1 electrical characteristics:(1)supply current (Pin 2): 0.6mA typical,0.4mA min and 1.5 mA max at VS = 5V, Ev = 0 and 1.0mA typical at VS = 5V, Ev = 40 klx, sunlight; (2)supply voltage: 4.5V min and 5.5V max; (3)transmission distance: 35m typical at Ev = 0, test signal see fig.7, IR diode TSAL6200, IF = 400mA; (4)output voltage low (Pin 3): 250mV max at IOSL = 0.5 mA,Ee = 0.7 mW/m2,f = fo,tp/T = 0.4; (5)irradiance (30 - 40 kHz):0.35 mW/m2 typical and 0.5 mW/m2 max at pulse width tolerance: tpi 5/fo < tpo < tpi + 6/fo, test signal(see fig.7); (6)irradiance (56 kHz):0.4 mW/m2 typical and 0.6 mW/m2 max at Pulse width tolerance: tpi 5/fo < tpo < tpi + 6/fo, test signal see fig.7; (7)irradiance: 30 W/m2 min; (8)directivity: ±45 deg typical at angle of half transmission distance.