Features: · Optical Glass Window
· 64 × 1 Sensor-Element Organization
· 200 Dots-Per-Inch (DPI) Sensor Pitch
· High Linearity and Uniformity
· Wide Dynamic Range . . . 2000:1 (66 dB)
· Output Referenced to Ground
· Low Image Lag . . . 0.5% Typ
· Operation to 5 MHz
· Single 5-V Supply
· Replacement for TSLW201Pinout
SpecificationsSupply voltage range, VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to 6 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to VDD + 0.3V
Input clamp current, IIK (VI < 0 or VI > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA to 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA to 25 mA
Voltage range applied to any output in the high impedance or
power-off state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to VDD + 0.3V
Continuous output current, IO (VO = 0 to VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA to 25 mA
Continuous current through VDD or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 40 mA to 40 mA
Analog output current range, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA to 25 mA
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 85
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 85
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
ESD tolerance, human body model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . 2000 V
† Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and unctional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not mplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
DescriptionThe TSLW201R linear sensor array consists of a 64 × 1 array of photodiodes, associated charge amplifier ircuitry, and a pixel data-hold function that provides simultaneous-integration start and stop times for all pixels.
The TSLW201R's pixels measure 120 mm (H) by 70 mm (W) with 125-mm center-to-center spacing and 55-mm spacing etween pixels. Operation is simplified by internal control logic that requires only a serial-input (SI) signal and clock.
The TSLW201R is intended for use in a wide variety of applications including mark detection and code reading, ptical character recognition (OCR) and contact imaging, edge detection and positioning as well as optical linear nd rotary encoding.
TSLW201R Data Sheet
