Position: Home  > All Categories> Integrated Circuits (ICs) > TSL1401R−LF

TSL1401R−LF

Features: · 128 × 1 Sensor-Element Organization· 400 Dots-Per-Inch (DPI) Sensor Pitch· High Linearity and Uniformity· Wide Dynamic Range . . . 4000:1 (72 dB)· Output Referenced to Ground· Low Image Lag . . . 0.5% Typ· Operation to 8 MHz· Single 3-V to 5-V Supply· Rail-to-Rail Output Swing (AO)· No...

product image

TSL1401R−LF Picture
See larger image
SeekIC No. : 004529524 Detail

TSL1401R−LF: Features: · 128 × 1 Sensor-Element Organization· 400 Dots-Per-Inch (DPI) Sensor Pitch· High Linearity and Uniformity· Wide Dynamic Range . . . 4000:1 (72 dB)· Output Referenced to Ground· Low Image ...

TSL1401R−LF Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
TSL1401R−LF
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/1/11

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

· 128 × 1 Sensor-Element Organization
· 400 Dots-Per-Inch (DPI) Sensor Pitch
· High Linearity and Uniformity
· Wide Dynamic Range . . . 4000:1 (72 dB)
· Output Referenced to Ground
· Low Image Lag . . . 0.5% Typ
· Operation to 8 MHz
· Single 3-V to 5-V Supply
· Rail-to-Rail Output Swing (AO)
· No External Load Resistor Required
· Replacement for TSL1401 and TSL1401R
· RoHS Compliant


Pinout

Connection Diagram


Specifications

Supply voltage range, VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 6 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  −0.3 V to VDD + 0.3V
Input clamp current, IIK (VI < 0) or (VI > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .−20 mA to 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .−25 mA to 25 mA
Voltage range applied to any output in the high impedance or power-off state, VO . .  −0.3 V to VDD + 0.3 V
Continuous output current, IO (VO = 0 to VDD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25 mA to 25 mA
Continuous current through VDD or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..−40 mA to 40 mA
Analog output current range, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. −25 mA to 25 mA
Maximum light exposure at 638 nm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . ..... 5 mJ/cm2
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .....−25 to 85
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .. −25 to 85
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds‡ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  260
ESD tolerance, human body model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V

† Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
‡ Not recommended for solder reflow.


Description

The TSL1401R−LF linear sensor array consists of a 128 * 1 array of photodiodes, associated charge amplifier circuitry, and an internal pixel data-hold function that provides simultaneous-integration start and stop times for all pixels. The pixels measure 63.5 m (H) by 55.5 m (W) with 63.5-m center-to-center spacing and 8-m spacing between pixels. Operation is simplified by internal control logic that requires only a serial-input (SI) signal and a clock.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Relays
WIMA MKP4 0.22UF 630V
WIMA MKP4 4.7UF 630VDC
Power Supplies - External/Internal (Off-Board)
A76L-0300-0077
A5E01231722-F2
Capacitors
GRM188R71H103KA01D
GRM21BR71H104KA01L
LED Products
LM24P20
KCG057QV1DB-G770
Connectors, Interconnects
ASP-134488-01
WM4078-ND
Tapes, Adhesives
803
AC452-2
View more