TSC2003

+VDD to GND ...........................................  0.3V to +6V
Digital Input Voltage to GND ..... . 0.3V to +VDD + 0.3V
Analog Input Voltage to GND.
All Pins Except 7, 8 ...... ................0.3V to +VDD + 0.3V
Analog Input Voltage Pins 7, 8 to GND ...0.3V to +6.0V
Operating Temperature Range ..........40°C to +85°C
Storage Temperature Range ...........65°C to +150°C
Power Dissipation ............................ (TJ Max TA)/ _JA
TSSOP Package
    Junction Temperature (TJ Max) .................... +150°C
    _JA Thermal Impedance ........................ +115.2°C/W
Lead Temperature, Soldering
    Vapor Phase (60s) ........................................+215°C
    Infrared (15s) .............................................. +220°C
    VFBGA Package
    Junction Temperature (TJ Max) .................... +125°C
    _JA Thermal Impedance ..............................+50°C/W
Lead Temperature, Soldering
    Vapor Phase (60s) ........................................+215°C
    Infrared (15s) .............................................. +220°C
NOTE:
(1) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. Exposure to absolute maximum conditions for extended periods may affect device reliability.

The TSC2003 is a 4-wire resistive touch screen controller. It also features direct measurement of two batteries, two auxiliary analog inputs, temperature measurement, and touchpressure measurement.

The TSC2003 has an on-chip 2.5V reference that can be utilized for the auxiliary inputs, battery monitors, and temperature- measurement modes. The reference can also be powered down when not used to conserve power. The
internal reference will operate down to 2.7V supply voltage while monitoring the battery voltage from 0.5V to 6V.
The TSC2003 is available in the small TSSOP-16 and VFBGA-48 packages and is specified over the 40°C to +85°C temperature range.