Features: ` Specified Break-Before-Make Switching` Low ON-State Resistance (1 )` Control Inputs Are 5-V Tolerant` Low Charge Injection` Excellent ON-Resistance Matching` Low Total Harmonic Distortion` 1.65-V to 5.5-V Single-Supply Operation` Latch-Up Performance Exceeds 100 mA Per JESD 78, Class I...
TS5A3159: Features: ` Specified Break-Before-Make Switching` Low ON-State Resistance (1 )` Control Inputs Are 5-V Tolerant` Low Charge Injection` Excellent ON-Resistance Matching` Low Total Harmonic Distortio...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
MIN |
MAX |
UNIT | |||
V+ |
Supply voltage range(2) |
−0.5 |
6.5 |
V | |
VNO, VCOM |
Analog voltage range(2)(3)(4) |
−0.5 |
V+ + 0.5 |
V | |
II/OK |
Analog port diode current | VNO, VCOM < 0 or VNO, VCOM > V+ |
±50 |
mA | |
INO, ICOM |
ON−state switch current | VNO, VCOM = 0 to V+ |
±200 |
mA | |
ON−state peak switch current(5) |
±400 |
mA | |||
VIN |
Digital input voltage range(2)(3) |
−0.5 |
6.5 |
V | |
IIK |
Digital input clamp current | VIN < 0 |
-50 |
mA | |
Continuous current through V+ or GND |
±100 |
mA | |||
JA |
Package thermal impedance(6) |
165 |
|||
Tstg |
Storage temperature range |
-65 |
150 |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated
conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) Pulse at 1 ms duration < 10% duty cycle.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
The TS5A3159 is a single-pole double throw (SPDT) analog switch that is designed to operate from 1.65-V to 5.5-V. The device offers a low ON-state esistance and an excellent ON-resistance, matching with the break-before-make feature to prevent signal distortion during the transferring of a signal from one channel to another. The device has an excellent total harmonic distortion (THD) performance and consumes very low power. These features of the TS5A3159 make this device suitable for portable audio applications.