Features: ` Low ON-State Resistance (0.75 )` Low Charge Injection` Excellent ON-State Resistance Matching`Isolation in Power-Down Mode, V+ = 0` Specified Break-Before-Make Switching` 2.25-V to 5.5-V Power Supply (V+)` 6-M Input Pulldown Allows Control Input (IN) to Be Unconnected` 1.8-V Compatible...
TS5A12301E: Features: ` Low ON-State Resistance (0.75 )` Low Charge Injection` Excellent ON-State Resistance Matching`Isolation in Power-Down Mode, V+ = 0` Specified Break-Before-Make Switching` 2.25-V to 5.5-V...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
MIN | MAX | UNIT | |||
V+ | Supply voltage range(3) | 0.5 | 6.5 | MIN | |
VNC VNO VCOM |
Analog voltage range(3) (4) (5) | 0.5 | V+ + 0.5 | MIN | |
IK | Analog port diode current | V+ < VNC, VNO, VCOM or VNC, VNO, VCOM < 0 | 50 | 50 | mA |
INC INO ICOM |
On-state switch current | VNC, VNO, VCOM = 0 to V+ | -200 | 200 | mA |
On-state peak switch current(6) | -400 | 400 | |||
VI | Digital input voltage range(3) (4) | -0.5 | 6.5 | V | |
IIK | Digital input clamp current | -50 | mA | ||
I+ IGND |
Continuous current through V+ or GND | -100 | 100 | mA | |
Tstg | Storage temperature range | -65 | 150 |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed.
(5) This value is limited to 5.5 V maximum.
(6) Pulse at 1-ms duration < 10% duty cycle
The TS5A12301E is a single-pole double-throw (SPDT) analog switch that is designed to operate from 2.25 V to 5.5 V. The device offers a low ON-state resistance with an excellent channel-to-channel ON-state resistance matching, and the break-before-make feature to prevent signal distortion during the transferring of a signal from one path to another.
The TS5A12301E has excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications. The control input (IN) pin can be connected to low-voltage GPIOs, allowing it to be controlled by 1.8-V signals.
The TS5A12301E has ±15-kV Air-Gap Discharge and ±8-kV Contact Discharge ESD protection for the COM port to GND, which make it compliant with the IEC Level 4 ESD standard (IEC 61000-4-2).