TS3L301DGGR

Crosstalk :
Bandwidth :
Switch Configuration :
Switch Voltage (Max) :
Number of Switches : Single
Maximum Operating Temperature : + 85 C
Mounting Style : SMD/SMT
Operating Supply Voltage : 3.3 V
On Time (Max) : 11.5 ns
Off Time (Max) : 8.5 ns
Package / Case : TSSOP-48
On Resistance (Max) : 4 Ohms


Description

The TS3L301DGGR belongs to TS39150 series which are using process with a PNP pass element for high current, high accuracy and low dropout voltage regulators and they are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, and positive and negative transient voltage spikes. This series is offered in 3-pin TO-263, TO-220 package. These regulator s feature 400mV(typ) dropout voltages and very low ground current, these devices TS3L301DGGR also find applications in lower current and low dropout critical systems, where their tiny dropout voltage and ground current values are important attributes.

The features of TS3L301DGGR can be summarized as (1)wide bandwidth (BW = 900 MHz Typ); (2)low crosstalk (XTALK = -41 dB Typ); (3)low bit-to-bit skew [tsk(o) = 0.2 ns Max]; (4)low and flat on-state resistance (ron = 4 Typ, ron(flat) = 0.7 Typ); (5)low input/output capacitance (CON = 10 pF Typ); (6)rail-to-rail switching on data I/O Ports (0 to 5 V); (7)VDD operating range from 3 V to 3.6 V; (8)Ioff supports partial-power-down mode operation; (9)latch-up performance exceeds 100 mA per JESD 78, Class II; (10)ESD performance tested per JESD 22 -2000-V human-body model (A114-B, class II) -1000-V charged-device model (C101); (11)suitable for 10/100/1000-Mbit ethernet signaling; (12)applications -10/100/1000 Base-T signal switching -differential (LVDS, LVPECL) signal switching -digital video signal routing -notebook docking signal routing -hub and router signal switching.

The absolute maximum ratings of TS3L301DGGR are (1)supply voltage range, VDD: -0.5 V to 4.6 V; (2)control input voltage range, VIN (see Notes 1 and 2): -0.5 V to 7 V . .; (3)switch I/O voltage range, VI/O (see Notes 1, 2, and 3): -0.5 V to 7 V .; (4)control input clamp current, IIK (VIN < 0): -50 mA; (5)I/O port clamp current, II/OK (VI/O < 0): -50 mA . .; (6)ON-state switch current, II/O (see Note 4): ±128 mA .; (7)continuous current through VDD or GND terminals: ±100 mA . .; (8)package thermal impedance, JA (see Note 5): DGG package: 70°C/W, DGV package: 58°C/W; (9)storage temperature range, Tstg: -65°C to 150°C (NOTES: 1. All voltages are with respect to ground, unless otherwise specified. 2. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. VI and VO are used to denote specific conditions for VI/O. 4. II and IO are used to denote specific conditions for II/O. 5. The package thermal impedance is calculated in accordance with JESD 51-7.).

Parameters:

Technical/Catalog Information	TS3L301DGGR
Vendor	Texas Instruments (VA)
Category	Integrated Circuits (ICs)
Type	Ethernet Switch
Voltage Supply Source	Single Supply
Voltage - Supply, Single/Dual (±)	3 V ~ 3.6 V
Circuit	1 x 16:8
On-State Resistance	8 Ohm
Mounting Type	Surface Mount
Package / Case	48-TSSOP
Packaging	Digi-Reel?
Current - Supply	250A
Operating Temperature	-40°C ~ 85°C
Function	Ethernet Switch
Drawing Number	296; 4040078; DGG; 48, 56, 64
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TS3L301DGGR TS3L301DGGR 296 17533 6 ND 296175336ND 296-17533-6