TS3L110D

Crosstalk :
Bandwidth :
Switch Voltage (Max) :
Maximum Operating Temperature : + 85 C
Mounting Style : SMD/SMT
Number of Switches : Quad
On Resistance (Max) : 8 Ohms
Operating Supply Voltage : 3.3 V
Switch Configuration : SPDT
On Time (Max) : 7 ns
Off Time (Max) : 5 ns
Package / Case : SOIC-16


Description

The TS3L110D belongs to TI TS3L110 LAN switch family which is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. This device has low and flat ron, wide bandwidth, and low crosstalk, making it suitable for 10 Base-T, 100 Base-T, and various other LAN applications. The device can be used to route signals from a 10/100 Base-T ethernet transceiver to the RJ-45 LAN connectors in laptops or in docking stations. The device is designed for low channel-to-channel skew and low crosstalk. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, E should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. When E is low, the switch is enabled, and the I port is connected to the Y port. When E is high, the switch is disabled, and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer. This TS3L110D can be used to replace mechanical relays in LAN applications.

The features of TS3L110D can be summarized as (1)wide bandwidth (BW = 500 MHz Typ); (2)low crosstalk (XTALK = -30 dB Typ); (3)bidirectional data flow, with near-zero propagation delay; (4)low and flat on-state resistance (ron = 4 Typ, ron(flat) = 1 ); (5)switching on data I/O ports (0 to 5 V); (6)VCC operating range from 3 V to 3.6 V; (7)Ioff supports partial-power-down mode operation; (8)data and control inputs have undershoot clamp diodes; (9)latch-up performance exceeds 100 mA Per JESD 78, Class II; (10)ESD performance tested per JESD 22 -2000-V human-body model (A114-B, Class II) -1000-V charged-device model (C101); (11)suitable for both 10 base-T/100 base-T signaling.

The absolute maximum ratings of TS3L110D are (1)supply voltage range, VCC: -0.5 V to 4.6 V; (2)control input voltage range, VIN (see Notes 1 and 2): -0.5 V to 7.0V; (3)switch I/O voltage range, VI/O (see Notes 1, 2, and 3): -0.5 V to 7.0V; (4)control input clamp current, IIK (VIN < 0): -50 mA; (5)I/O port clamp current, II/OK (VI/O < 0): -50 mA; (6)ON-state switch current, II/O (see Note 4): ±128 mA; (7)continuous current through VCC or GND terminals: ±100 mA; (8)package thermal impedance, JA (see Note 5): D package: 73°C/W, DB package: 82°C/W, DBQ package: 90°C/W, PW package: 108°C/W,(see Note 6): RGY package: 39°C/W; (9)storage temperature range, Tstg: -65°C to 150°C(NOTES: 1. All voltages are with respect to ground, unless otherwise specified. 2. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 3. VI and VO are used to denote specific conditions for VI/O. 4. II and IO are used to denote specific conditions for II/O. 5. The package thermal impedance of the TS3L110D is calculated in accordance with JESD 51-7. 6. The package thermal impedance is calculated in accordance with JESD 51-5.).

Parameters:

Technical/Catalog Information	TS3L110D
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Type	Ethernet Switch
Voltage Supply Source	Single Supply
Voltage - Supply, Single/Dual (±)	3 V ~ 3.6 V
Circuit	4 x SPDT
On-State Resistance	8 Ohm
Mounting Type	Surface Mount
Package / Case	16-SOIC
Packaging	Tube
Current - Supply	0.7mA
Operating Temperature	-40°C ~ 85°C
Function	Ethernet Switch
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TS3L110D TS3L110D