Features: ` Low ON-State Resistance (ron) 0.9 Max (3-V Supply) 1.5 Max (1.8-V Supply)` 0.4 Max ron Flatness (3-V Supply)` 1.6-V to 3.6-V Single-Supply Operation` Available in SOT-23 and MSOP Packages` High Current-Handling Capacity (100 mA Continuous)` 1.8-V CMOS Logic Compatible (3-V Supply)` ...
TS3A4741: Features: ` Low ON-State Resistance (ron) 0.9 Max (3-V Supply) 1.5 Max (1.8-V Supply)` 0.4 Max ron Flatness (3-V Supply)` 1.6-V to 3.6-V Single-Supply Operation` Available in SOT-23 and MSOP Pack...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
MIN | MAX | UNIT | |||
V+ | Supply voltage reference to GND(2) | 0.3 | 4 | V | |
VNO VCOM VIN |
Analog and digital voltage range | 0.3 | V+ + 0.3 | V | |
INO ICOM |
On-state switch current | VNO, VCOM = 0 to V+ | 100 | 100 | mA |
I+ IGND |
Continuous current through V+ or GND | ±100 | mA | ||
Peak current pulsed at 1 ms, 10% duty cycle | COM, VNO, VCOM | ±200 | mA | ||
JA | Package thermal impedance(3) | DCN package | 88 | /W | |
DGK package | 88 | ||||
TA | Operating temperature range | 40 | 85 | ||
TJ | Junction temperature | 150 | |||
Tstg | Storage temperature range | 65 | 150 |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum-rated conditions for extended periods may affect device reliability.
(2) Signals on COM or NO exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum current rating.
(3) The package thermal impedance is measured in accordance with JESD 51-7.
The TS3A4741 is a low ON-state resistance (ron), low-voltage, dual single-pole/single-throw (SPST) analog switch that operates from a single 1.6-V to 3.6-V supply. This device has fast switching speeds, handles rail-to-rail analog signals, and consumes very low quiescent power.
The digital logic input is 1.8-V CMOS compatible when using a single 3-V supply.The TS3A4741 has two normally open (NO) switches that are available in 8-pin SOT-23 and MSOP packages.