Features: Dropout voltage typically 0.4V @Io=1.0AOutput current up to 1.0ALow ground currentOutput voltage trimmed before assemblyExtremely fast transient responseReversed leakage protectionReverse battery protectionError flag signals output out of regulationInternal current limitThermal shutdown...
TS39100: Features: Dropout voltage typically 0.4V @Io=1.0AOutput current up to 1.0ALow ground currentOutput voltage trimmed before assemblyExtremely fast transient responseReversed leakage protectionReverse...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Supply Voltage | Vin | -20V ~ +20 | V |
Enable Voltage | Ven | +20 | V |
Storage Temperature Range TSTG | TSTG | -65 ~ +150 | oC |
Lead Soldering Temperature (260 oC) | 5 | S | |
ESD | (Note 3) |
The TS39100/1/2/3 series are 1A ultra low dropout linear voltage regulators that provide low voltage, high current output from an extremely small package. These regulator offers extremely low dropout (typically 400mV at 1A) and very low ground current (typically 12mA at 1A).
The TS39100/1/2/3 series are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, positive and negative transient voltage spikes, logic level enable control and error flag which signals whenever the output falls out of regulation.
On the TS39100, the enable pin may be tied to Vin if it is not required for enable control. This series are offered in 3-pin SOT-223 (TS39100), 8-pin SOP (TS39101/2) and 5-pin TO-252 (TS39103) package.