Features: ·Dropout voltage typically 0.4V @Io=1.0A ·Output current up to 1.0A ·Low ground current ·Output voltage trimmed before assembly ·Extremely fast transient response ·+60V Transient peak voltage ·-20V Reverse peak voltage ·Zero current shutdown mode ·Error flag signals output out of regulat...
TS29102CS5: Features: ·Dropout voltage typically 0.4V @Io=1.0A ·Output current up to 1.0A ·Low ground current ·Output voltage trimmed before assembly ·Extremely fast transient response ·+60V Transient peak volt...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ·Output voltage compatible with DTL, ECL, TTL, ·MOS and CMOS Logic Levels ·Low input bia...
Input Supply Voltage (Note 2) | Vin | -20V ~ +60 | V |
Operation Input Voltage | Vin (operate) | 26 | V |
Power Dissipation (Note 3) | PD | Internally Limited | W |
Operating Junction Temperature Range | TJ | -40 ~ +150 | |
Storage Temperature Range | TSTG | -65 ~ +150 | |
Lead Soldering Temperature (260 ) TO-220 / TO-263 Package |
5 | S |
The TS29102CS5 series are using process with a PNP pass element for high current, high accuracy and low dropout voltage regulators. These regulator s feature 400mV(typ) dropout voltages and very low ground current, the sedevices also find applications in lower current and low dropout critical systems, where their tiny dropout voltage and ground current values are important attributes.
The TS29102CS5 series are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, positive and negative transient voltage spikes, logic level enable control and error flag which signals whenever the output falls out of regulation.
On the TS29102CS5, the enable pin may be tied to Vin if it is not required for enable control. This series are
offered in 3-pin SOT-223 and 8-pin SOP pacakge.