TS29101

Features:

·Dropout voltage typically 0.4V @Io=1.0A
·Output current up to 1.0A
·Low ground current
·Output voltage trimmed before assembly
·Extremely fast transient response
·+60V Transient peak voltage
·-20V Reverse peak voltage
·Zero current shutdown mode
·Error flag signals output out of regulation
·Internal current limit
·Thermal shutdown protection


Application

`Battery power equipment
`Automotive electronics
`High efficiency "Green" computer system
`High efficiency linear power supplies
`High efficiency post regulator for switching supply


Description

The TS29101 series are using process with a PNP pass element for high current, high accuracy and low dropout voltage regulators. These regulator s feature 400mV(typ) dropout voltages and very low ground current, these devices also find applications in lower current and low dropout critical systems, where their tiny dropout voltage and ground current values are important attributes.

The TS29101 series are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, positive and negative transient voltage spikes, logic level enable control and error flag which signals whenever the output falls out of regulation.

On the TS29101, the enable pin may be tied to Vin if it is not required for enable control. This series are offered in 3-pin SOT-223 and 8-pin SOP pacakge.