TS2012

1. All voltage values are measured with respect to the ground pin.
2. The magnitude of the input signal must never exceed V_CC + 0.3V / GND - 0.3V.
3. The device is protected in case of over temperature by a thermal shutdown active @ 150.
4. Exceeding the power derating curves during a long period will cause abnormal operation.
5. Human body model: 100 pF discharged through a 1.5 k resistor between two pins of the device, done for all couples of pin combinations with other pins floating.
6. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ), done for all couples of pin combinations with other pins floating.

The TS2012 is a stereo fully differential class D power amplifier. Able to drive up to 1.35W into an 8 load at 5V per channel. It achieves outstanding efficiency compared to typical class AB audio amps.

The TS2012 has four different gain settings utilizing two discrete pins: G0 and G1.Pop & click reduction circuitry provides low on/off switch noise while allowing the device to start within 1ms.Two standby pins (active low) allow each channel to be switched off independently.

The TS2012 is available in a QFN20 package in 4x4 mm dimension.