TS2007FC

1. All voltage values are measured with respect to the ground pin.6 VVin Input voltage (2)
2. The magnitude of input signal must never exceed VCC + 0.3 V / GND - 0.3 V
3. The device is protected in case of over temperature by a thermal shutdown active @ 150° C.
4. Exceeding the power derating curves during a long period provokes abnormal operating conditions.
5. Human body model: 100 pF discharged through a 1.5 k resistor between two pins of the device, done for ll couples of pin combinations with other pins floating.
6. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two ins of the device with no external series resistor (internal resistor < 5 ), done for all couples of pin ombinations with other pins floating.
7. Implemented short-circuit protection protects the amplifier against damage by short-circuit between ositive and negative outputs and between outputs and ground.

The TS2007FC is a class D power audio amplifier. Able to drive up to 1.4 W into an 8 load at 5 V, it achieves better efficiency than typical class AB audio power amplifiers.

This TS2007FC can switch between two gain settings, 6 dB or 12 dB via a logic signal on the gain select pin. Pop and click reduction circuitry provides low on/off switch noise and allows the device to start within 1 ms typically.