TS03WBE

The TS03WBE can be used in test and measurement equipment;computers and peripherals or telecommunications networking equipment.It has some features such as:(1)reliable contact design ensures long electrical life;(2)ratings up to 3 AMPS;(3)epoxy terminal-seal compatible with bottom wash cleaning and (4)RoHS compliant.

Let me show you the important specifications of the TS03WBE:(1)CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TS01 Model): 3 AMPS @ 120 V AC or 28 V DC; (TS02, TS03 Models): 1 AMP @ 120 V AC or 28 V DC. See page I-10 for additional ratings;(2)ELECTRICAL LIFE:TS01 MODELS: 60,000 make-and-break cycles at full load.TS02, TS03 MODELS: 30,000 cycles;(3)CONTACT RESISTANCE: Below 20 m ½ typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts;(4)OPERATING TEMPERATURE:30ºC to 85ºC;(5)SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging);(6)DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.

Materials of the TS03WBE are:(1)CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DAP)(UL 94V-0);(2)ACTUATOR: Nylon, black standard;(3)HOUSING: Stainless steel or stainless steel, nickel plated;(4)END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page I-10 for additional contact materials;(5)CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page J-9 for additional contact materials;(6)TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical Data chapter.