Features: ` Duplex LC Single Mode Transceiver` IEEE 802.3z 1000BASE-ZX Compliant` Fibre Channel 1X SM-LC-L FC-PI Compliant` Small Form Factor, RJ-45 size, 2X5 pin Package` 1550 nm DFB LD Transmitter` 32 dB Power Budget at Least` Distance up to 120 km` AC/AC Coupled Signal Input / Output` LVTTL Tra...
TRSL-73120CG: Features: ` Duplex LC Single Mode Transceiver` IEEE 802.3z 1000BASE-ZX Compliant` Fibre Channel 1X SM-LC-L FC-PI Compliant` Small Form Factor, RJ-45 size, 2X5 pin Package` 1550 nm DFB LD Transmitter...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ` Duplex LC Single Mode Transceiver ` SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant ` Sm...
Features: `Duplex LC Single Mode Transceiver`SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant`Small F...
Features: ` Duplex LC Single Mode Transceiver ` SONET OC-3 LR-1 / SDH STM-1 (L-1.1) Compliant ` Sm...
Parameter | Symbol | Min | Max | Units | Notes |
Storage Temperature | Tstg | -40 | 85 | Notes | |
Operating Temperature | Topr | 0 | 70 | Air flow 1m/sec | |
Soldering Temperature | - | 260 | 10 seconds on leads only | ||
Power Supply Voltage | VCC | 0 | 4.5 | V | |
Input Voltage | - | GND | VCC | V | |
Output Current | Iout | 0 | 30 | mA |
The TRSL-73120CG series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as IEEE 802.3z Gigabit Ethernet 1000BASE-ZX and Fiber Channel 1X SM-LC-L FC-PI. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. A guaranteed minimum optical link budget of 32 dB is offered which can correspond to a link distance of over 120 km (assuming worst case fiber loss of 0.22 dB/km). The transmitter section uses a multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section of the TRSL-73120CG uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry.