Features: ` Duplex LC Single Mode Transceiver ` SONET OC-12 LR-1 / SDH STM-4 (L-4.1) Compliant ` Small Form Factor, RJ-45 size, 2X5 pin Package ` 1310 nm LD Transmitte `LVPECL Signal Input / Output ` LVTTL Transmitter Disable Input ` LVPECL Signal Detection Output : TRSL-5140G ` LVTTL Signal Detec...
TRSL-5140G: Features: ` Duplex LC Single Mode Transceiver ` SONET OC-12 LR-1 / SDH STM-4 (L-4.1) Compliant ` Small Form Factor, RJ-45 size, 2X5 pin Package ` 1310 nm LD Transmitte `LVPECL Signal Input / Output ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ` Duplex LC Single Mode Transceiver ` SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant ` Sm...
Features: `Duplex LC Single Mode Transceiver`SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant`Small F...
Features: ` Duplex LC Single Mode Transceiver ` SONET OC-3 LR-1 / SDH STM-1 (L-1.1) Compliant ` Sm...
Parameter |
Symbol |
Min |
Max |
Units |
Notes |
Storage Temperature |
Tstg |
-40 |
85 |
||
Operating Temperature |
Topr |
0 -40 |
70 85 |
TRSL-5140G TRSL-5140AG | |
Soldering Temperature |
--- |
260 |
10 seconds on leads only | ||
Power Supply Voltage |
Vcc |
0 |
4.5 |
V |
|
Input Voltage |
--- |
GND |
VCC |
V |
|
Output Current |
Iout |
0 |
30 |
mA |
The TRSL-5140G series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-12 LR-1 / SDH STM-4 (L-4.1) and Fiber Channel. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. A guaranteed minimum optical link budget of 25 dB is offered which can correspond to a link distance of over 40 km (assuming worst case fiber loss of 0.45 dB/km). The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) of the TRSL-5140G mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry.