Features: ` Duplex LC Single Mode Transceiver` SONET OC-3 LR-2 / SDH STM-1 (L-1.2) Compliant` Small Form Factor, RJ-45 size, 2X10 pin Package` 1550 nm DFB LD Transmitter` 34 dB Link Power Budget at Least` Distance up to 120 km` Analog Monitor Function-- Transmitter Laser Bias Current-- Transmitter...
TRSL-33120WG: Features: ` Duplex LC Single Mode Transceiver` SONET OC-3 LR-2 / SDH STM-1 (L-1.2) Compliant` Small Form Factor, RJ-45 size, 2X10 pin Package` 1550 nm DFB LD Transmitter` 34 dB Link Power Budget at ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: ` Duplex LC Single Mode Transceiver ` SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant ` Sm...
Features: `Duplex LC Single Mode Transceiver`SONET OC-3 IR-1 / SDH STM-1 (S-1.1) Compliant`Small F...
Features: ` Duplex LC Single Mode Transceiver ` SONET OC-3 LR-1 / SDH STM-1 (L-1.1) Compliant ` Sm...
Parameter |
Symbol |
Min |
Max |
Units |
Notes |
Storage Temperature |
Tstg |
-40 |
85 |
||
Operating Temperature |
Topr |
0 |
70 |
With air flow 1m/sec | |
Soldering Temperature |
- |
260 |
10 seconds on leads only | ||
Power Supply Voltage |
Vcc |
0 |
4.5 |
V |
|
Input Voltage |
- |
GND |
Vcc |
V |
|
Output Current |
Iout |
0 |
30 |
A |
The TRSL-33120WG series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as SONET OC-3 LR-2 / SDH STM-1 (L-1.2) and Fast Ethernet. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm.A guaranteed minimum optical link budget of 34 dB is offered which can correspond to a link distance of over 120 km (assuming worst case fiber loss of 0.25 dB/km). The transmitter section uses a multiple quantumwell laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) of the TRSL-33120WG mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry.