Features: ` Up to 4.25 Gb/s Bi-directional Data Link` Duplex LC Multi-Mode Transceiver` Compliant with Fibre Channel FC-PH-2 for 400-M5-SN-1 and 400-M6-SN-1` Compliant with IEEE 802.3z 1000BASE-SX` Link Distance at 4.25 Gbd 150 m links with 50/125 mm MMF Cables 70 m links with 62.5/125 mm MMF Cabl...
TRML-8100WG: Features: ` Up to 4.25 Gb/s Bi-directional Data Link` Duplex LC Multi-Mode Transceiver` Compliant with Fibre Channel FC-PH-2 for 400-M5-SN-1 and 400-M6-SN-1` Compliant with IEEE 802.3z 1000BASE-SX` ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: · Duplex LC Multi-Mode Transceiver· Small Form Factor 2X5 pin Package· 0 to 2000 m Trans...
Features: · Duplex LC Multi-Mode Transceiver· ATM Form 622.08Mb/s Physical Layer Compliant· SONET ...
Features: ` Duplex LC Multi-Mode Transceiver` Compliant with IEEE 802.3z 1000BASE-SX` Compliant wi...
Parameter | Symbol | Min | Max | Units | Notes |
Storage Temperature | Tstg | -40 | 85 | Notes | |
Operating Temperature | Topr | 0 -10 |
70 85 |
TRML-8100WG TRML-8100BWG | |
Soldering Temperature | - | 260 | 10 seconds on leads only | ||
Power Supply Voltage | VCC | 0 | 4.5 | V | |
Input Voltage | - | GND | VCC | V | |
Output Current | Iout | 0 | 30 | mA |
The TRML-8100WG series multi-mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as Fibre Channel 4x/2x/1x and Gigabit Ethernet 1000BASE-SX. This 2×7 pin SFF transceiver comply with the 2×5 standard package defined by the SFF MSA with the exception of four extra pins for real-time digital diagnostics and transmitter fault indication. Digital diagnostic functions of TRML-8100WG are available via the 2-wire serial interface defined in the SFF-8472 MSA. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a multiple quantum well 850 nm VCSEL and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section of TRML-8100WG uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry.