TRC102

Maximum Data Rate :
Maximum Operating Temperature :
Interface Type :
Packaging : Reel
Operating Supply Voltage : 2.5 V, 3.3 V
Package / Case : TSSOP-16
Modulation Format : FSK
Frequency Range : 400 MHz to 1000 MHz
Output Power : 4.5 dBm to 7 dBm


Features:

• Modulation: FSK (Frequency Hopping Spread Spectrum capability)
• Frequency range: 400-1000 MHz
• High sensitivity: (-112 dBm)
• High data rate: Up to 256 kbps
• Low current consumption (RX current ~11mA)
• Operating supply voltage: 2.2 to 3.8V
• Low standby current (0.3uA)
• Programmable Synch Byte
• Integrated PLL, IF, Baseband Circuitry
• Automatic Frequency Adjust(TX/RX frequency alignment)
• Programmable Analog/Digital Baseband Filter
• Programmable Output RF Power
• Programmable Input LNA Gain
• Internal Valid Data Recognition
• Transmit/Receive FIFO
• Standard SPI Interface
• TTL/CMOS Compatible I/O pins
• Programmable CLK Output Freq
• Automatic Antenna tuning circuit
• Low cost, generic 10MHz Xtal reference
• Integrated, Programmable Low Battery Voltage Detector
• Programmable Wake-up Timer with programmable Duty Cycle
• Integrated Selectable Analog/Digital RSSI
• Integrated Crystal Oscillator
• External Processor Interrupt pin
• Programmable Crystal Load Capacitance
• Programmable Data Rate
• Integrated Clock & Data Recovery
• Programmable FSK Deviation Polarity
• External Wake-up Events




Application

• Active RFID tags
• Automated Meter reading
• Home & Industrial Automation
• Security systems
• Two way Remote keyless entry
• Automobile Immobilizers
• Sports & Performance monitoring
• Wireless Toys
• Medical equipment
• Low power two way telemetry systems
• Wireless mesh sensors
• Wireless modules




Pinout






Specifications

Symbol	Parameter	Min	Max	Max
VDD	Positive supply voltage	-0.5	6	V
Vin	Voltage on any pin (except RF_P and RF_N)	-0.5	Vdd+0.5	V
Voc	Voltage on open collector outputs (RF1, RF2) 1	-0.5	Vdd+1.5	V
Iin	Input current into any pin except VDD and VSS	-25	25	mA
ESD	Electrostatic discharge with human body model		1000	V
Tstg	Storage temperature	-55	125
Tlead	Lead temperature (soldering, max 10 s)		260

Note 1: At maximum, VDD+1.5 V cannot be higher than 7 V.




Description

TRC102 is a highly integrated single chip, zero-IF, multi-channel, low power RF transceiver. It is an ideal fit for low cost, high volume, two way short-range wireless applications for use in the unlicensed 400-1000 MHz frequency bands. The TRC102 is FCC & ETSI certifiable and improves upon the TRC101 with improved phase noise and is capable of higher output power. All critical RF and baseband functions are completely integrated in the chip, thus minimizing external component count and simplifying and speeding design-ins. Use of a low cost, generic 10MHz crystal and a low-cost microcontroller is all that is needed to create a complete link. The TRC102 also incorporates different sleep modes to reduce overall current consumption and extend battery life. Its small size with low power consumption makes it ideal for various short range radio applications.

Parameters:

Technical/Catalog Information	TRC102
Vendor	RF MONOLITHICS INC (VA)
Category	RF and RFID
Frequency	400MHz ~ 1GHz
Data Rate - Maximum	256 kbps
Modulation or Protocol	FSK
Applications	General Purpose
Power - Output	5dBm
Sensitivity	-112dBm
Voltage - Supply	2.2 V ~ 3.8 V
Current - Receiving	12mA
Current - Transmitting	23mA
Package / Case	16-TSSOP
Operating Temperature	-40°C ~ 85°C
Data Interface	PCB, Surface Mount
Antenna Connector	PCB, Surface Mount
Packaging	Cut Tape (CT)
Memory Size	-
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TRC102 TRC102 583 1094 1 ND 58310941ND 583-1094-1