Features: • 200-mA RF Low-Dropout Regulator With Enable• Available in 1.8-V, 2.5-V, 2.8-V, 2.85-V, 3-V, 3.3-V, 4.75-V, and Adjustable (1.22-V to 5.5-V)• High PSRR (70 dB at 10 kHz)• Ultralow-Noise (32 µ V RMS , TPS79328)• Fast Start-Up Time (50 µ s)•...
TPS79330: Features: • 200-mA RF Low-Dropout Regulator With Enable• Available in 1.8-V, 2.5-V, 2.8-V, 2.85-V, 3-V, 3.3-V, 4.75-V, and Adjustable (1.22-V to 5.5-V)• High PSRR (70 dB at 10 kHz)...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
UNIT | |
V IN range | -0.3 V to 6 V |
V EN range | -0.3 V to V IN + 0.3 V |
V OUT range | -0.3 V to 6 V |
Peak output current | Internally limited |
ESD rating, HBM | 2 kV |
ESD rating, CDM | 500 V |
Continuous total power dissipation | See Dissipation Ratings Table |
Junction temperature range, DBV package | -40 ° C to 150 ° C |
Junction temperature range, YEQ package | -40 ° C to 125 ° C |
Storage temperature range, T stg | -40 ° C to 150 ° C |
The TPS79330 low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow-noise, fast start-up, and excellent line and load transient responses in NanoStar wafer chip scale and SOT23 packages. NanoStar packaging gives an ultrasmall footprint as well as an ultralow profile and package weight, making it ideal for portable applications such as handsets and PDAs. Each device TPS79330 is stable, with a small 2.2- µ F ceramic capacitor on the output. The TPS793xx family uses an advanced, proprietary BiCMOS fabrication process to yield extremely low dropout voltages (e.g., 112 mV at 200 mA, TPS79330). Each device TPS79330 achieves fast start-up times (approximately 50 µ s with a 0.001- µ F bypass capacitor) while consuming very low quiescent current (170 µ A typical). Moreover, when the device is placed in standby mode, the supply current is reduced to less than 1 µ A. The TPS79328 exhibits approximately 32 µ V RMS of output voltage noise at 2.8-V output with a 0.1- µ F bypass capacitor. Applications with analog components that are noise-sensitive, such as portable RF electronics, benefit from the high PSRR and low-noise features as well as the fast response time.