Features: · 200-mA RF Low-Dropout Regulator With Enable
· Available in 1.8-V, 2.5-V, 2.8-V, 2.85-V, 3-V,3.3-V, 4.75-V, and Adjustable (1.22-V to 5.5-V)
· High PSRR (70 dB at 10 kHz)
· Ultralow-Noise (32 µVRMS, TPS79328)
· Fast Start-Up Time (50 µs)
· Stable With a 2.2-µF Ceramic Capacitor
· Excellent Load/Line Transient Response
· Very Low Dropout Voltage (112 mV at Full Load, TPS79330)
· 5- and 6-Pin SOT23 (DBV) and NanoStar Wafer Chip Scale (YEQ, YZQ) Packages
Application· RF: VCOs, Receivers, ADCs
· Audio
· Cellular and Cordless Telephones
· Bluetooth®, Wireless LAN
· Handheld Organizers, PDAsPinout
Specifications
| |
UNIT |
| VIN range |
-0.3 V to 6 V |
| VEN range |
-0.3 V to VIN + 0.3 V |
| VOUT range |
-0.3 V to 6 V |
| Peak output current |
Internally limited |
| ESD rating, HBM |
2 kV |
| ESD rating, CDM |
500 V |
| Continuous total power dissipation |
See Dissipation Ratings Table |
| Junction temperature range, DBV package |
-40°C to 150°C |
| Junction temperature range, YEQ package |
-40°C to 125°C |
| Storage temperature range, Tstg |
-65°C to 150°C |
DescriptionThe TPS79328 low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow-noise,fast start-up, and excellent line and load transient responses in NanoStar wafer chip scale and SOT23 packages. NanoStar packaging gives an ultrasmall footprint as well as an ultralow profile and package weight, making it ideal for portable applications such as handsets and PDAs. Each device in the family is stable, with a small 2.2-µF ceramic capacitor on the output. The TPS79328 family uses an advanced,proprietary BiCMOS fabrication process to yield extremely low dropout voltages (e.g., 112 mV at 200 mA, TPS79330). Each device achieves fast start-up times (approximately 50 µs with a 0.001-µF bypass capacitor) while consuming very low quiescent current (170 µA typical). Moreover, when the device is placed in standby mode, the supply current is reduced to less than 1 µA. The TPS79328 exhibits approximately 32 µVRMS of output voltage noise at 2.8-V output with a 0.1-µF bypass capacitor. Appli- cations with analog components that are noise-sensitive, such as portable RF electronics,benefit from the high PSRR and low-noise features as well as the fast response time.
TPS79328 Data Sheet
