TPS73701DCQRG4

Number of Outputs : 1
Output Type : Adjustable
Maximum Operating Temperature : + 125 C
Mounting Style : SMD/SMT
Input Voltage MAX : 5.5 V
Output Current : 1 A
Output Voltage : 1.2 V to 5.5 V
Package / Case : SOT-6
Dropout Voltage (Max) : 0.5 V at 1 A
Load Regulation : 0.002 % / mA


Features:

` Stable with 1.0F or Larger Ceramic Output Capacitor
` Input Voltage Range: 2.2V to 5.5V
` Ultra-Low Dropout Voltage: 130mV typ at 1A
` Excellent Load Transient Response-Even With Only 1.0F Output Capacitor
` NMOS Topology Delivers Low Reverse Leakage Current
` 0.5% Initial Accuracy
` 3% Overall Accuracy Over Line, Load, and Temperature
` Less Than 20nA typical I_Q in Shutdown Mode
` Thermal Shutdown and Current Limit for Fault Protection
` Available in Multiple Output Voltage Versions
   Adjustable Output: 1.20V to 5.5V
   Custom Outputs Available Using Factory Package-Level Programming


Application

· Point of Load Regulation for DSPs, FPGAs, ASICs, and Microprocessors
· Post-Regulation for Switching Supplies
· Portable/Battery-Powered Equipment


Pinout




Specifications

	TPS736xx	UNIT
VIN range	-0.3 to 6.0	V
VEN range	-0.3 to 6.0	V
VOUT range	-0.3 to 5.5	V
Peak output current	Internally limited
Output short-circuit duration	Indefinite
Continuous total power dissipation	See Dissipation Ratings Table
Junction temperature range, TJ	-55 to +150	°C
Storage temperature range	-65 to +150	°C
ESD rating, HBM	2	kV
ESD rating, CDM	500	V

Description

The TPS73701DCQRG4 family of linear low-dropout (LDO) voltage regulators uses an NMOS pass element in a voltage-follower configuration. This topology is relatively insensitive to output capacitor value and ESR, allowing a wide variety of load configurations. Load transient response is excellent, even with a small 1.0F ceramic output capacitor. The NMOS topology of TPS73701DCQRG4 also allows very low dropout for the die size used.

The TPS73701DCQRG4 family uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 1A and ideal for portable applications. These TPS73701DCQRG4 are protected by thermal shutdown and foldback current limit.

Parameters:

Technical/Catalog Information	TPS73701DCQRG4
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Regulator Type	Single Output
Package / Case	SOT-223 (5 leads + Tab)
Packaging	Tape & Reel (TR)
Regulator Topology	Positive Adjustable
Current - Output	1A
Voltage - Output	1.2 ~ 5.5 V
Operating Temperature	-40°C ~ 125°C
Voltage - Input	2.2 ~ 5.5 V
Number of Regulators	1
Current - Limit (Min)	1.05A
Current Short Circuit (Isc)	450mA
Drawing Number	296; 4202109; DCQ; 6
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TPS73701DCQRG4 TPS73701DCQRG4