TPS736xx

Features:

` Stable with No Output Capacitor or Any Value or Type of Capacitor
` Input Voltage Range of 1.7V to 5.5V
` Ultra-Low Dropout Voltage: 75mV typ
` Excellent Load Transient Response-with or without Optional Output Capacitor
` New NMOS Topology Delivers Low Reverse Leakage Current
` Low Noise: 30VRMS typ (10Hz to 100kHz)
` 0.5% Initial Accuracy
` 1% Overall Accuracy Over Line, Load, and Temperature
` Less Than 1A max IQ in Shutdown Mode
` Thermal Shutdown and Specified Min/Max Current Limit Protection
` Available in Multiple Output Voltage Versions
    Fixed Outputs of 1.20V to 4.3V
    Adjustable Output from 1.20V to 5.5V
   Custom Outputs Available


Application

· Portable/Battery-Powered Equipment
· Post-Regulation for Switching Supplies
· Noise-Sensitive Circuitry such as VCOs
· Point of Load Regulation for DSPs, FPGAs,ASICs, and Microprocessors


Pinout




Specifications

	TPS736xx	UNIT
VIN range	-0.3 to 6.0	v
VEN range	-0.3 to 6.0	v
VOUT range	-0.3 to 5.5	v
Peak output current	Internally limited
Output short-circuit duration	Indefinite
Continuous total power dissipation	See Dissipation Ratings Table
Junction temperature range, TJ	-55 to +150	°C
Storage temperature range	-65 to +150	°C
ESD rating, HBM	2	kV
ESD rating, CDM	500	v

Description

The TPS736xx family of low-dropout (LDO) linear or Type of Capacitor voltage regulators uses a new topology: an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR, and even allows operation without a capacitor. TPS736xx also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current.

The TPS736xx uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current.