Features: ` Dual, 200mA High-Performance LDOs
` Low Total Quiescent Current: 90A with Both LDOs Enabled
` Low Noise: 70VRMS/V
` Active Output Pulldown (TPS719xx)
` Independent Enables for Each LDO
` PSRR: 65dB at 1kHz, 45dB at 1MHz
` Available in Multiple Fixed-Output Voltage Combinations from 0.9V to 3.6V Using Innovative Factory EEPROM Programming
` Fast Start-Up Time: 160s
` Over-Current, Over-Temperature and Under-Voltage Protection
` Low Dropout: 230mV at 200mA
` Stable with 1F Ceramic Output Capacitor
` Available in 2mm * 2mm SON-6 Package
Application· Digital Cameras
· Cellular Camera Phones
· Wireless LAN, Bluetooth®
· Handheld ProductsPinout
Specifications
|
PARAMETER |
TPS718xx, TPS719xx |
UNIT |
| Input voltage range, VIN |
0.3 to +7.0 |
V |
| Enable voltage range, VEN1 and VEN2 |
0.3 to VIN + 0.3V |
V |
| Output voltage range, VOUT |
0.3 to +7.0 |
V |
| Peak output current |
Internally limited |
| Output short-circuit duration |
Indefinite |
| Junction temperature range, TJ |
55 to +150 |
°C |
| Storage temperature range , TSTG |
55 to +150 |
°C |
| Total continuous power dissipation, PDISS |
See Dissipation Ratings Table |
| ESD rating, HBM |
2 |
KV |
| ESD rating, CDM |
500 |
V |
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.
DescriptionThe TPS718xx and TPS719xx families of low-dropout (LDO) regulators offer a high power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient responses while consuming a very low 90mA (typical)at no load ground current with both LDOs enabled.
The TPS719xx also provides an active pulldown circuit to quickly discharge output loads. The TPS718xx and TPS719xx are stable with ceramic capacitors and use an advanced BiCMOS fabrication process to yield a typical dropout voltage of 230mVat 200mA output loads. The TPS718xx and TPS719xx also use a precision voltage reference Both families of devices are fully specified from TJ = 40°C to +125°C and are offered in a 2mm * 2mm SON-6 package that is ideal for applications .
TPS719xx Data Sheet
