TPS71726DCKR

Number of Outputs : 1
Maximum Operating Temperature : + 125 C
Mounting Style : SMD/SMT
Output Type : Fixed
Output Current : 150 mA
Input Voltage MAX : 6.5 V
Package / Case : SOT-5
Dropout Voltage (Max) : 0.3 V at 150 mA
Load Regulation : 120 uV / mA
Output Voltage : 2.6 V


Features:

` 150mA Low-Dropout Regulator with Enable
` Low IQ: 50mA (typical)
` Available in Multiple Output Versions:
   Fixed Output with Voltages from 0.9V to 3.3V Using Innovative Factory EEPROM Programming
   Adjustable Output with Voltages from 0.9V to 6.0V
` Ultra-High PSRR:
   70dB at 1kHz, 67dB at 100kHz and 45dB at 1MHz
` Low Noise: 30mV typical (100Hz to 100kHz)
` Stable with a 1.0mF Ceramic Capacitor
` Excellent Load/Line Transient Response
` 3% Overall Accuracy (over Load/Line/Temp)
` Over-Current and Over-Temperature Protection
` Very Low Dropout: 170mV Typical at 150mA
` Small SC70-5 Package


Application

· Mobile Phone Handsets
· Wireless LAN, Bluetooth™
· PDAs and Smartphones


Pinout




Specifications

PARAMETER	TPS717xx	UNIT
Input voltage range, VIN	0.3 to +7.0	V
Feedback input voltage range, VFB	0.3 to +3.6	V
Enable voltage range, VEN	0.3 to VIN + 0.3V(2)	V
Output voltage range, VOUT	0.3 to +7.0	V
Maximum output current, IOUT	Internally limited
Continuous total power dissipation, PDISS	See Dissipation Rating Table
Junction temperature range, TJ	55 to +150	°C
Storage junction temperature range , TSTG	55 to +150	°C
ESD rating, HBM	2	kV
ESD rating, CDM	500	V

(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum
conditions for extended periods may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those specified is not
implied.
(2) VEN absolute maximum rating is VIN + 0.3V or +7.0V, whichever is greater.


Description

The TPS71726DCKR low-dropout (LDO), low-power linear regulators offers very high power supply rejection (PSRR) while maintaining very low 50mA ground current in an ultra-small, five-pin SC70 package. The family uses an advanced BiCMOS process and a PMOSFET pass device to achieve fast start-up, very low noise, excellent transient response,and excellent performance. The TPS71726DCKR is stable with a 1.0mF ceramic output capacitor, and uses a precision voltage reference and feedback loop to achieve a worst-case overall accuracy of 3% over all load, line, process, and temperature variations. TPS71726DCKR is fully specified from T_J = 40°C to +125°C and is offered in a small, five-pin SC70 package, which is ideal for small form factor portable equipment such as wireless handsets and PDAs.

Parameters:

Technical/Catalog Information	TPS71726DCKR
Vendor	Texas Instruments (VA)
Category	Integrated Circuits (ICs)
Regulator Type	Single Output
Package / Case	SC-70-5, SC-88A, SOT-323-5, SOT-353, 5-TSSOP
Packaging	Digi-Reel?
Regulator Topology	Positive Fixed
Current - Output	150mA
Voltage - Output	2.6V
Operating Temperature	-40°C ~ 125°C
Voltage - Input	2.5 ~ 6.5 V
Number of Regulators	1
Current - Limit (Min)	200mA
Current Short Circuit (Isc)	-
Drawing Number	296; 4093553-3; DCK; 5
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TPS71726DCKR TPS71726DCKR 296 19647 6 ND 296196476ND 296-19647-6