Features: `1-W Output (VCC . 4.5 V)`2.7-V to 9-V Input Operating Range`78% Typical Efficiency`160-kHz Fixed-Frequency Current-Mode PWM Controller`EN Input Inhibits Operation and Reduces Supply Current to 1 mA`Output Voltage Limited to M VOM 3 12 V VCC`Soft Start`8-Pin SOIC and DIP Packages`40°C to...
TPS6755: Features: `1-W Output (VCC . 4.5 V)`2.7-V to 9-V Input Operating Range`78% Typical Efficiency`160-kHz Fixed-Frequency Current-Mode PWM Controller`EN Input Inhibits Operation and Reduces Supply Curre...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $33.48 - 33.48 / Piece
Power Management IC Development Tools 2 batt cells
The TPS6755 is an adjustable inverting dc/dc converter capable of operating from inputs as low as 2.7 V. The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, two resistors, and a Schottky rectifier. An enable input of TPS6755 is provided to shut down the inverter when an output voltage is not needed. The typical supply current is 1.9 mA at no-load and is further reduced to 1-mA when the enable input is low.
The TPS6755 features a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the converter output to reduce the die area needed to realize the 0.4-W MOSFET. Soft start is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 mA.
The TPS6755 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply current.
Available in an 8-pin DIP or an 8-pin SOIC package, the TPS6755 operates over a free-air temperature range of 40°C to 85°C.