Features: ` Negative 5-V 200-mA Output (VCC 4.5 V)` 4-V to 6.2-V Input Operating Range` 78% Typical Efficiency` 160-kHz Fixed-Frequency Current-Mode PWM Controller` EN Input Inhibits Operation and Reduces Supply Current to 1 A` Soft Start` 8-Pin SOIC and DIP Packages` 40 to 85 Free-Air Temperature...
TPS6735: Features: ` Negative 5-V 200-mA Output (VCC 4.5 V)` 4-V to 6.2-V Input Operating Range` 78% Typical Efficiency` 160-kHz Fixed-Frequency Current-Mode PWM Controller` EN Input Inhibits Operation and R...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $33.48 - 33.48 / Piece
Power Management IC Development Tools 2 batt cells
The TPS6735 is a fixed negative 5-V output inverting dc/dc converter capable of delivering 200 mA from inputs as low as 4.5 V. The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, and a Schottky rectifier. An enable input of TPS6735 is provided to shut down the inverter when a 5-V output is not needed. The typical supply current is 1.9 mA at no-load and is further reduced to 1-mA when the enable input is low.
The TPS6735 is a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the 5-V output to reduce the die area needed to realize the 0.4-W MOSFET. Soft start of TPS6735 is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 A.
The TPS6735 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply current.
The TPS6735 is available in 8-pin DIP and SOIC packages and operates over a free-air temperature range of 40 to 85.