Features: ` Up to 93% Efficiency at 3-MHz Operation` Up to 500-mA Output Current at VI = 2.7 V` 3-MHz Fixed Frequency Operation` Best in Class Load and Line Transient` Complete 1-mm Component Profile Solution` -0.5% / +1.3% PWM DC Voltage Accuracy Over Temperature` 35-ns Minimum On-Time` Power-Sav...
TPS62306: Features: ` Up to 93% Efficiency at 3-MHz Operation` Up to 500-mA Output Current at VI = 2.7 V` 3-MHz Fixed Frequency Operation` Best in Class Load and Line Transient` Complete 1-mm Component Profil...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $33.48 - 33.48 / Piece
Power Management IC Development Tools 2 batt cells
UNIT | ||
VI |
Voltage at VIN, AVIN(2) |
-0.3 V to 7.0 V |
Voltage at SW (2) |
-0.3 V to 7.0 V | |
Voltage at FB, ADJ |
-0.3V to 3.6 V | |
Voltage at EN, MODE/SYNC (2) |
-0.3 V to VIN + 0.3 V | |
Voltage at VOUT(2) |
0.3 V to 5.4 V | |
Power dissipation |
Internally limited | |
TA Operating temperature range |
-40°C to 85°C | |
TJ (max) Maximum operating junction temperature |
150°C | |
Tstg Storage temperature range |
-65°C to 150°C |
The TPS623xx device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS623xx supports up to 500-mA load current and allows the use of tiny, low cost chip inductor and capacitors.
The TPS623xx is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery or by 3-cell NiMH/NiCd batteries. With an output voltage range from 5.4 V down to 0.6 V, the TPS623xx supports low-voltage DSPs and processors in smart-phones, PDAs as well as notebooks, and handheld computers.
The TPS62300 operates at 3-MHz fixed switching frequency and enters the power-save mode operation at light load currents to maintain high efficiency over the entire load current range.For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE/SYNC pin high. The TPS623xx can also be synchronized to an external clock signal in the range of 3 MHz. In the shutdown mode,the current consumption is reduced to less than 1 A.
The TPS623xx is available in a 10-pin leadless package (3 * 3 mm QFN) and an 8-pin chip-scale package (CSP).