Features: · LED Driver With Integrated Overvoltage and Short-Circuit Protection · 2.7-V to 6.0-V Input Voltage Range· 500-mV/250-mV Feedback Voltage· TPS61060 Powers Up to 3 LEDs · TPS61061 Powers Up to 4 LEDs · TPS61062 Powers Up to 5 LEDs · Digital Still Camera · Handheld Devices· Digital Bright...
TPS61061: Features: · LED Driver With Integrated Overvoltage and Short-Circuit Protection · 2.7-V to 6.0-V Input Voltage Range· 500-mV/250-mV Feedback Voltage· TPS61060 Powers Up to 3 LEDs · TPS61061 Powers U...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $33.48 - 33.48 / Piece
Power Management IC Development Tools 2 batt cells
UNIT | ||
VIN(2) | SupplyVvoltages on pin | 0.3 to 7 V |
EN, ILED, FB(2) | Voltages on pins | 0.3 V to 7 V |
OUT(2) | Voltage on pin | 33 V |
Voltage on pin | 33 V | |
Continuous power dissipation | See Dissipation Rating Table | |
Operating junction temperature range | 40°C to 150°C | |
Storage temperature range | 55°C to 150°C | |
Lead temperature (soldering, 10 sec) | 260°C |
The TPS61060/61/62 is a high-frequency, synchronous boost converter with constant current output to drive up to 5 white LEDs. For maximum safety, the TPS61060/61/62 features integrated overvoltage and an advanced short-circuit protection when the output is shorted to ground. The device operates with 1-MHz fixed switching frequency to allow small external components and to simplify possible EMI problems. The TPS61060/61/62 comes with three different overvoltage protection thresholds (14 V/18 V/23 V) to allow inexpensive and small-output capacitors with lower
voltage ratings. The LED current is initially set with the external sense resistor Rs, and the feedback voltage is regulated to 500 mV or 250 mV, depending on the ILED pin configuration. Digital brightness control is implemented by applying a simple digital signal to the ILED pin. Alternatively, a PWM signal up to 1 kHz can be applied to the enable pin to control the LED brightness. During shutdown, the output of TPS61060/61/62 is disconnected from the input to avoid leakage current through the LEDs.